pl011: Convert CONFIG_PL011_SERIAL to Kconfig

[u-boot] / include / configs / T102xRDB.h

diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index 025e7de8d00bc3dc48f90f8e9954614d06e030b2..733e44f75c7b59e76267bdfeb3b987b4db7d9a66 100644 (file)
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -160,7 +160,6 @@
 
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS             0
 #define CONFIG_ENV_SPI_CS              0
 #define CONFIG_ENV_SPI_MAX_HZ          10000000
@@ -174,13 +173,11 @@
 #endif
 #elif defined(CONFIG_SDCARD)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
 #define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
 #if defined(CONFIG_TARGET_T1024RDB)
 #define CONFIG_ENV_OFFSET              (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
@@ -188,13 +185,11 @@
 #define CONFIG_ENV_OFFSET              (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #endif
 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
-#define CONFIG_ENV_IS_IN_REMOTE
 #define CONFIG_ENV_ADDR                0xffe20000
 #define CONFIG_ENV_SIZE                0x2000
 #elif defined(CONFIG_ENV_IS_NOWHERE)
 #define CONFIG_ENV_SIZE                0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
@@ -224,7 +219,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MEMTEST_START       0x00200000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x00400000
 #define CONFIG_SYS_ALT_MEMTEST
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
 /*
  *  Config the L3 Cache as L3 SRAM
@@ -397,7 +391,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_DDR_LAW                11
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 
 #if defined(CONFIG_NAND)
 #define CONFIG_SYS_CSPR0_EXT           CONFIG_SYS_NAND_CSPR_EXT
@@ -655,7 +648,6 @@ unsigned long get_board_ddr_clk(void);
 
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
-#define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
 #define CONFIG_SYS_BMAN_NUM_PORTALS    10
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #ifdef CONFIG_PHYS_64BIT
@@ -761,7 +753,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "FM1@DTSEC4"
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
 /*
@@ -770,14 +761,7 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
-                       "spi0=spife110000.1"
-#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
-                       "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
-                       "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
-                       "1m(uboot),5m(kernel),128k(dtb),-(user)"
 #endif
 
 /*
@@ -786,15 +770,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_REGINFO
-
-#ifdef CONFIG_PCI
-#define CONFIG_CMD_PCI
-#endif
-
 /*
  * Miscellaneous configurable options
  */
@@ -802,14 +777,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE  CONFIG_SYS_CBSIZE  /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data