sunxi: Fix reset hang on sun5i

[u-boot] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 030ea7e66051decf14fb6d9951af4aaf2a9c23f2..f2a75aed43b0864b9c2ab09610f0fde302e73a9a 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -43,6 +43,10 @@
 #define CONFIG_SYS_BOOK3E_HV           /* Category E.HV supported */
 #define CONFIG_MP                      /* support multiple processors */
 
+/* support deep sleep */
+#define CONFIG_DEEP_SLEEP
+#define CONFIG_SILENT_CONSOLE
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
@@ -197,6 +201,12 @@ unsigned long get_board_ddr_clk(void);
                                CSPR_MSEL_NOR | \
                                CSPR_V)
 #define CONFIG_SYS_NOR_AMASK   IFC_AMASK(128*1024*1024)
+
+/*
+ * TDM Definition
+ */
+#define T1040_TDM_QUIRK_CCSR_BASE      0xfe000000
+
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR    CSOR_NAND_TRHZ_80
 #define CONFIG_SYS_NOR_FTIM0   (FTIM0_NOR_TACSE(0x4) | \
@@ -376,7 +386,7 @@ unsigned long get_board_ddr_clk(void);
                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
 /* Serial Port - controlled on board with jumper J8
@@ -597,6 +607,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
+#define CONFIG_QE
+#define CONFIG_U_QE
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*
@@ -619,6 +631,7 @@ unsigned long get_board_ddr_clk(void);
 #else
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
+#define CONFIG_SYS_QE_FW_ADDR          0xEFF10000
 #endif
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
@@ -760,8 +773,7 @@ unsigned long get_board_ddr_clk(void);
        "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
        "fdtaddr=c00000\0"                                      \
        "fdtfile=t1040qds/t1040qds.dtb\0"                       \
-       "bdev=sda3\0"                                           \
-       "c=ffe\0"
+       "bdev=sda3\0"
 
 #define CONFIG_LINUX                       \
        "setenv bootargs root=/dev/ram rw "            \