powerpc: mpc85xx: Move CONFIG_FSL_LAW to Kconfig

[u-boot] / include / configs / T208xQDS.h

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 1508f1d8b5e4e236b11563abd3038b29788770a2..b984fcd96e678fe6a16a412316f91472def29bfd 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -11,17 +11,16 @@
 #ifndef __T208xQDS_H
 #define __T208xQDS_H
 
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_MMC
 #define CONFIG_USB_EHCI
-#if defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_ARCH_T2080)
 #define CONFIG_T2080QDS
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_SRIO                /* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1           /* SRIO port 1 */
 #define CONFIG_SRIO2           /* SRIO port 2 */
-#elif defined(CONFIG_PPC_T2081)
+#elif defined(CONFIG_ARCH_T2081)
 #define CONFIG_T2081QDS
 #endif
 
@@ -42,21 +41,13 @@
 #define CONFIG_SYS_NUM_CPC     CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC         /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                /* Enable SEC/CAAM */
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg
-#if defined(CONFIG_PPC_T2080)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_rcw.cfg
-#elif defined(CONFIG_PPC_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
-#endif
 
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
@@ -76,13 +67,16 @@
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#if defined(CONFIG_ARCH_T2080)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
+#elif defined(CONFIG_ARCH_T2081)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
+#endif
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
@@ -92,6 +86,11 @@
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#if defined(CONFIG_ARCH_T2080)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
+#elif defined(CONFIG_ARCH_T2081)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
+#endif
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
@@ -106,6 +105,11 @@
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#if defined(CONFIG_ARCH_T2080)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
+#elif defined(CONFIG_ARCH_T2081)
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
+#endif
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -544,7 +548,6 @@ unsigned long get_board_ddr_clk(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */
@@ -594,7 +597,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_FSL_PCIE_RESET     /* need PCIe reset errata */
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 #endif