powerpc, muas3001: remove CONFIG_SYS_RAMBOOT

[u-boot] / include / configs / T208xQDS.h

diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 784310a112013268cf6f12f2dc43b0cb1d8e8c06..d1fe78ef0c2d494b24cbb71112ad52d355776930 100644 (file)
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -44,6 +44,7 @@
 #define CONFIG_SYS_FSL_CPC     /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC     CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC         /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                /* Enable SEC/CAAM */
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_ENV_OVERWRITE
 
@@ -55,7 +56,6 @@
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_rcw.cfg
 #endif
 
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -234,7 +234,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 #define CONFIG_DDR_SPD
 #define CONFIG_SYS_FSL_DDR3
-#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SYS_SPD_BUS_NUM 0
 #define CONFIG_SYS_SDRAM_SIZE  2048    /* for fixed parameter use */
 #define SPD_EEPROM_ADDRESS1    0x51
@@ -494,6 +494,23 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_PCA_ADDR_SEC2  0x76 /* I2C bus multiplexer,secondary 2 */
 #define I2C_MUX_CH_DEFAULT     0x8
 
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR           0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+
+#define CONFIG_VID_FLS_ENV             "t208xqds_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_IR36021_READ
+/* The lowest and highest voltage allowed for T208xQDS */
+#define VDD_MV_MIN                     819
+#define VDD_MV_MAX                     1212
 
 /*
  * RapidIO
@@ -778,6 +795,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_NET
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 /*
  * Miscellaneous configurable options
  */
@@ -785,7 +808,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING         /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "     /* Monitor Command Prompt */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE      1024      /* Console I/O Buffer Size */
 #else
@@ -910,6 +932,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
+#define CONFIG_CMD_BLOB
 #undef CONFIG_CMD_USB
 #endif