keymile/powerpc: move to the architecture-generic board system

[u-boot] / include / configs / T4240RDB.h

diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 183255d2831ebb3c1e4a4e4e33a6cf5c0238443b..e639e1d57af0f5c88e15b948785593ecb33f1747 100644 (file)
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -47,6 +47,7 @@
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCIE1                   /* PCIE controler 1 */
 #define CONFIG_PCIE2                   /* PCIE controler 2 */
@@ -513,6 +514,29 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CS2_FTIM2           CONFIG_SYS_NOR_FTIM2
 #define CONFIG_SYS_CS2_FTIM3           CONFIG_SYS_NOR_FTIM3
 
+/* CPLD on IFC */
+#define CONFIG_SYS_CPLD_BASE   0xffdf0000
+#define CONFIG_SYS_CPLD_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR3_EXT   (0xf)
+#define CONFIG_SYS_CSPR3       (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
+                               | CSPR_PORT_SIZE_8 \
+                               | CSPR_MSEL_GPCM \
+                               | CSPR_V)
+
+#define CONFIG_SYS_AMASK3      IFC_AMASK(4*1024)
+#define CONFIG_SYS_CSOR3       0x0
+
+/* CPLD Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0           (FTIM0_GPCM_TACSE(0x0e) | \
+                                       FTIM0_GPCM_TEADC(0x0e) | \
+                                       FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1           (FTIM1_GPCM_TACO(0x0e) | \
+                                       FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS3_FTIM2           (FTIM2_GPCM_TCS(0x0e) | \
+                                       FTIM2_GPCM_TCH(0x0) | \
+                                       FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3           0x0
+
 #if defined(CONFIG_RAMBOOT_PBL)
 #define CONFIG_SYS_RAMBOOT
 #endif
@@ -668,6 +692,12 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define __USB_PHY_TYPE utmi
@@ -751,6 +781,7 @@ unsigned long get_board_ddr_clk(void);
  * which is anyways not used in Secure Environment.
  */
 #undef CONFIG_CMD_USB
+#define CONFIG_CMD_BLOB
 #endif
 
 #endif /* __CONFIG_H */