xes: Add board_flash_wp_on()

[u-boot] / include / configs / XPEDITE5200.h

diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 370aae1c4c692eecb39bd5b2416365e46ee1c97e..1ad9b461d36989fb0d4508915aff4ebda6e083dd 100644 (file)
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -36,8 +36,12 @@
 #define CONFIG_MPC8548         1
 #define CONFIG_XPEDITE5200     1
 #define CONFIG_SYS_BOARD_NAME  "XPedite5200"
+#define CONFIG_SYS_FORM_PMC_XMC        1
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_pre_init */
-#define CONFIG_RELOC_FIXUP_WORKS       /* Fully relocate to SDRAM */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE   0xfff80000
+#endif
 
 #define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCI_PNP         1       /* do pci plug-and-play */
@@ -82,7 +86,6 @@
 #define CONFIG_SYS_CCSRBAR             0xef000000      /* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS        CONFIG_SYS_CCSRBAR      /* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR                CONFIG_SYS_CCSRBAR      /* PQII uses CONFIG_SYS_IMMR */
-#define CONFIG_SYS_PCI1_ADDR   (CONFIG_SYS_CCSRBAR + 0x8000)
 
 /*
  * Diagnostics
@@ -103,7 +106,7 @@
  * 0xfc00_0000 0xffff_ffff     NOR Flash 1             64M non-cacheable
  */
 
-#define CONFIG_SYS_LBC_LCRR    (LCRR_CLKDIV_4 | LCRR_EADC_3)
+#define CONFIG_SYS_LBC_LCRR    (LCRR_CLKDIV_8 | LCRR_EADC_3)
 
 /*
  * NAND flash configuration
@@ -129,9 +132,10 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500             /* Flash Write Timeout (ms) */
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST      { {0xfff40000, 0xc0000}, \
                                                  {0xfbf40000, 0xc0000} }
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
 /*
  * Chip select configuration
@@ -213,9 +217,6 @@
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
-#define CONFIG_SYS_64BIT_VSPRINTF      1
-#define CONFIG_SYS_64BIT_STRTOUL       1
-
 /*
  * I2C
  */
@@ -226,7 +227,6 @@
 #define CONFIG_SYS_I2C_OFFSET          0x3000
 #define CONFIG_SYS_I2C2_OFFSET         0x3100
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x50
@@ -251,7 +251,7 @@
 #define CONFIG_SYS_PCA953X_BRD_CFG2            0x04
 #define CONFIG_SYS_PCA953X_XMC_ROOT0           0x08
 #define CONFIG_SYS_PCA953X_FLASH_PASS_CS       0x10
-#define CONFIG_SYS_PCA953X_FLASH_WP            0x20
+#define CONFIG_SYS_PCA953X_NVM_WP              0x20
 #define CONFIG_SYS_PCA953X_MONARCH             0x40
 #define CONFIG_SYS_PCA953X_EREADY              0x80
 
@@ -269,10 +269,10 @@
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_SYS_PCI1_MEM_BASE       0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_BUS                0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS       CONFIG_SYS_PCI1_MEM_BUS
 #define CONFIG_SYS_PCI1_MEM_SIZE       0x40000000      /* 1G */
-#define CONFIG_SYS_PCI1_IO_BASE                0x00000000
+#define CONFIG_SYS_PCI1_IO_BUS         0x00000000
 #define CONFIG_SYS_PCI1_IO_PHYS                0xe8000000
 #define CONFIG_SYS_PCI1_IO_SIZE                0x00800000      /* 1M */
 
@@ -340,8 +340,10 @@
 #define CONFIG_CMD_PCA953X
 #define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_CMD_PCI
+#define CONFIG_CMD_PCI_ENUM
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SNTP
+#define CONFIG_CMD_REGINFO
 
 /*
  * Miscellaneous configurable options
@@ -355,6 +357,7 @@
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 #define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 #define CONFIG_CMDLINE_EDITING 1               /* add command line history     */
+#define CONFIG_AUTO_COMPLETE   1               /* add autocompletion support */
 #define CONFIG_LOADADDR                0x1000000       /* default location for tftp and bootm */
 #define CONFIG_BOOTDELAY       3               /* -1 disables auto-boot */
 #define CONFIG_PANIC_HANG                      /* do not reset board on panic */
@@ -370,12 +373,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
-
-/*
- * Boot Flags
- */
-#define BOOTFLAG_COLD          0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02            /* Software reboot */
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 /*
  * Environment Configuration