#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
#if 0
-#define CFG_I2C_NOPROBES {{0,0x69}} * Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#endif
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */
+#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */
+
/*
* Ethernet configuration
*/
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_EEPROM
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
* to 0xFFFF, watchdog timeouts after about 64s. For details refer
* to chapter 36 of the MPC5121e Reference Manual.
*/
-#define CONFIG_WATCHDOG /* enable watchdog */
+/* #define CONFIG_WATCHDOG */ /* enable watchdog */
#define CFG_WATCHDOG_VALUE 0xFFFF
/*
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#ifdef CONFIG_CMD_KGDB
- #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
*
* Boot Flags
*/
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
#ifdef CONFIG_CMD_KGDB
#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
/*
* Environment Configuration
*/
-#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TIMESTAMP
#define CONFIG_HOSTNAME ads5121
-#define CONFIG_BOOTFILE uImage
+#define CONFIG_BOOTFILE ads5121/uImage
-#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */
#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
"echo"
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "u-boot_addr_r=200000\0" \
+ "kernel_addr_r=200000\0" \
+ "fdt_addr_r=400000\0" \
+ "ramdisk_addr_r=500000\0" \
+ "u-boot_addr=FFF00000\0" \
+ "kernel_addr=FC000000\0" \
+ "fdt_addr=FC2C0000\0" \
+ "ramdisk_addr=FC300000\0" \
+ "ramdiskfile=ads5121/uRamdisk\0" \
+ "fdtfile=ads5121/ads5121.dtb\0" \
+ "u-boot=ads5121/u-boot.bin\0" \
"netdev=eth0\0" \
+ "consdev=ttyPSC0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "addtty=setenv bootargs ${bootargs} " \
+ "console=${consdev},${baudrate}\0" \
"flash_nfs=run nfsargs addip addtty;" \
- "bootm ${kernel_addr}\0" \
+ "bootm ${kernel_addr_r} - ${fdt_addr}\0" \
"flash_self=run ramargs addip addtty;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
- "load=tftp 200000 /tftpboot/ads5121/u-boot.bin\0" \
- "update=protect off FFF00000 +${filesize};" \
- "era FFF00000 +${filesize};cp.b 200000 FFF00000 ${filesize}\0" \
- "upd=run load;run update\0" \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${fdt_addr_r} ${fdtfile};" \
+ "run nfsargs addip addtty;" \
+ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
+ "net_self=tftp ${kernel_addr_r} ${bootfile};" \
+ "tftp ${ramdisk_addr_r} ${ramdiskfile};" \
+ "tftp ${fdt_addr} ${fdtfile};" \
+ "run ramargs addip addtty;" \
+ "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}\0"\
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=protect off ${u-boot_addr} +${filesize};" \
+ "era ${u-boot_addr} +${filesize};" \
+ "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \
+ "upd=run load update\0" \
""
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
#define CONFIG_BOOTCOMMAND "run flash_self"
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,5121@0"
+#define OF_SOC "soc5121@80000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5121@80000000/serial@11300"
+
#endif /* __CONFIG_H */
projects / u-boot / blobdiff