edminiv2: add mvsata_ide and cmd_ide support

[u-boot] / include / configs / afeb9260.h

diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h
index 33a67ca8304a0b2ee07e5aab6ec703b707a13ef2..24484fd0c87565dda50bf21ecaa1bdf6831baab2 100644 (file)
--- a/include/configs/afeb9260.h
+++ b/include/configs/afeb9260.h
@@ -26,16 +26,15 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* ARM asynchronous clock */
-#define AT91_MAIN_CLOCK                18429952        /* from 18.432 MHz crystal */
-#define AT91_MASTER_CLOCK      89999598        /* peripheral = main / 2 */
-#define CONFIG_SYS_AT91_PLLB   0x107c3e18      /* PLLB settings for USB */
-#define CONFIG_SYS_HZ          1000000         /* 1us resolution */
+#define CONFIG_AT91_LEGACY
 
-#define AT91_SLOW_CLOCK                32768   /* slow clock */
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_MAIN_CLOCK             18429952        /* from 18.432 MHz crystal */
+#define CONFIG_SYS_HZ          1000
 
 #define CONFIG_AT91SAM9260     1       /* It's an Atmel AT91SAM9260 SoC*/
 #define CONFIG_AFEB9260                1       /* on an AFEB9260 Board */
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
@@ -48,6 +47,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -69,11 +69,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
@@ -87,6 +87,7 @@
 #define PHYS_SDRAM_SIZE                        0x04000000      /* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH           1
 #define CONFIG_SYS_SPI_WRITE_TOUT              (5 * CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         2
@@ -108,6 +109,7 @@
 #define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PC13
+
 #endif
 
 /* NOR flash - no real flash on this board */
@@ -122,6 +124,7 @@
 #define CONFIG_NET_RETRY_COUNT         20
 
 /* USB */
+#define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
@@ -160,7 +163,6 @@
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
 
-#define ROUND(A, B)            (((A) + (B)) & ~((B) - 1))
 /*
  * Size of malloc() pool
  */