Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig

[u-boot] / include / configs / am43xx_evm.h

diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 25f63e8311425ebdaf50e76bd0df4a39c4744c1c..159954d7de56bb0019bfd64aa73d11687c4a483f 100644 (file)
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -71,20 +71,11 @@
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550_COM1                0x44e09000      /* Base EVM has UART0 */
 
-#define CONFIG_ENV_IS_IN_FAT
-#define FAT_ENV_INTERFACE              "mmc"
-#define FAT_ENV_DEVICE_AND_PART                "0:1"
-#define FAT_ENV_FILE                   "uboot.env"
-#define CONFIG_FAT_WRITE
-
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
-
 /* SPL USB Support */
 
 #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION              1
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_AM437X_USB2PHY2_HOST
@@ -98,9 +89,9 @@
 
 #undef CONFIG_USB_GADGET_DOWNLOAD
 #undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_G_DNL_MANUFACTURER
-#undef CONFIG_G_DNL_VENDOR_NUM
-#undef CONFIG_G_DNL_PRODUCT_NUM
+#undef CONFIG_USB_GADGET_MANUFACTURER
+#undef CONFIG_USB_GADGET_VENDOR_NUM
+#undef CONFIG_USB_GADGET_PRODUCT_NUM
 #undef CONFIG_USB_GADGET_DUALSPEED
 #endif
 
@@ -128,8 +119,6 @@
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           CONFIG_ISW_ENTRY_ADDR
 #endif
-#undef CONFIG_ENV_IS_IN_FAT
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64 KB sectors */
@@ -151,7 +140,6 @@
 #endif
 
 /* SPI */
-#undef CONFIG_OMAP3_SPI
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_QSPI_SEL_GPIO                   48
 #define CONFIG_SF_DEFAULT_SPEED                48000000
@@ -251,18 +239,11 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_PHY_GIGE
 #endif
 
 #define CONFIG_DRIVER_TI_CPSW
-#define CONFIG_PHYLIB
 #define PHY_ANEG_TIMEOUT       8000 /* PHY needs longer aneg time at 1G */
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT)
-#undef CONFIG_ENV_IS_IN_FAT
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 
 /* NAND support */
@@ -275,8 +256,6 @@
                                         CONFIG_SYS_NAND_PAGE_SIZE)
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH16_CODE_HW
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  NAND_LARGE_BADBLOCK_POS
@@ -318,14 +297,9 @@
                                        "-(NAND.file-system)"
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x00180000
 /* NAND: SPL related configs */
-#ifdef CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_AM33XX_BCH
-#endif
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_CMD_SPL_NAND_OFS                0x00100000 /* os parameters */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS        0x00300000 /* kernel offset */
-#define CONFIG_CMD_SPL_WRITE_SIZE      CONFIG_SYS_NAND_BLOCK_SIZE
 #endif
 #define NANDARGS \
        "mtdids=" MTDIDS_DEFAULT "\0" \
@@ -347,4 +321,9 @@
 #define NANDBOOT
 #endif /* CONFIG_NAND */
 
+#if defined(CONFIG_TI_SECURE_DEVICE)
+/* Avoid relocating onto firewalled area at end of DRAM */
+#define CONFIG_PRAM (64 * 1024)
+#endif /* CONFIG_TI_SECURE_DEVICE */
+
 #endif /* __CONFIG_AM43XX_EVM_H */