ls102xa: Adjust some macros for SD boot on LS1021A QDS board

[u-boot] / include / configs / aristainetos-common.h

diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index 7d3499a2f2025e54de9fd4884158bbf3710c1bdb..f03297e137762199fcdddb85683748266b5197f4 100644 (file)
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -26,26 +26,12 @@
 
 #define CONFIG_MXC_UART
 
-#define CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
@@ -56,24 +42,15 @@
 #define CONFIG_PHY_MICREL
 
 #define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MTD
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_MXC_SPI
-#define CONFIG_SF_DEFAULT_BUS          3
 #define CONFIG_SF_DEFAULT_SPEED                20000000
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
 /* Command definition */
 #define CONFIG_CMD_BMODE
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_SETEXPR
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=u-boot.scr\0" \
@@ -128,9 +105,6 @@
        "ubiboot=echo Booting from ubi ...; " \
                "run ubiargs addmtd addmisc set_fit_default;" \
                "bootm ${fit_addr_r}\0" \
-       "ubifs_load_fit=sf probe;ubi part ubi 2048;ubifsmount ubi:rootfs;" \
-               "ubifsload ${fit_addr_r} /boot/system.itb; " \
-               "imi ${fit_addr_r}\0 " \
        "rescueargs=setenv bootargs console=${console},${baudrate} " \
                "root=/dev/ram rw\0 " \
        "rescueboot=echo Booting rescue system from NOR ...; " \
@@ -175,23 +149,13 @@
 
 #define CONFIG_ARP_TIMEOUT             200UL
 
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
-
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x100000)
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128 * 1024)
 
 /* Physical Memory Map */
@@ -219,16 +183,14 @@
 #define CONFIG_ENV_OFFSET              (0x0d0000)
 #define CONFIG_ENV_OFFSET_REDUND       (0x0e0000)
 
-#define CONFIG_OF_LIBFDT
-
-#define CONFIG_CMD_CACHE
-
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 /* I2C */
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           0x7f
@@ -256,7 +218,6 @@
 
 /* USB Configs */
 #define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
 #define CONFIG_USB_STORAGE
@@ -266,11 +227,11 @@
 #define CONFIG_MXC_USB_FLAGS   0
 
 /* UBI support */
+#define CONFIG_LZO
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_MTD_PARTITIONS
 #define CONFIG_MTD_DEVICE
 #define CONFIG_RBTREE
-#define CONFIG_LZO
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS