#define __CONFIG_H
/* ARM asynchronous clock */
-#define AT91_CPU_NAME "AT91CAP9"
#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define AT91_MASTER_CLOCK 100000000 /* peripheral */
-#define AT91_CPU_CLOCK 200000000 /* cpu */
-#define CFG_AT91_PLLB 0x10073e01 /* PLLB settings for USB */
-#define CONFIG_SYS_HZ 1000000 /* 1us resolution */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
+#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_ATMEL_LCD_BGR555 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
+
#define CONFIG_BOOTDELAY 3
/*
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
/* NAND flash */
-#define NAND_MAX_CHIPS 1
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
+#endif
+
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
/* Ethernet */
#define CONFIG_MACB 1
#define CONFIG_RESET_PHY_R 1
/* USB */
+#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW 1
-#define LITTLEENDIAN 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */
#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
-#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
/*
* Size of malloc() pool
*/