/*
- * (C) Copyright 2007
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
* Configuation settings for the AT91CAP9ADK board.
#define __CONFIG_H
/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 200000000 /* from 12 MHz crystal */
-#define AT91C_MASTER_CLOCK 100000000 /* peripheral = main / 2 */
-#define CFG_HZ 1000000 /* 1us resolution */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
+#define AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
+#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SKIP_RELOCATE_UBOOT
-#define ROUND(A, B) (((A) + (B)) & ~((B) - 1))
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000)
-#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
-
-#define CONFIG_BAUDRATE 115200
-
/*
* Hardware drivers
*/
-
#define CONFIG_ATMEL_USART 1
#undef CONFIG_USART0
#undef CONFIG_USART1
#undef CONFIG_USART2
#define CONFIG_USART3 1 /* USART 3 is DBGU */
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 rw rootfstype=jffs2"
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_LCD_LOGO 1
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO 1
+#define CONFIG_LCD_INFO_BELOW_LOGO 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_ATMEL_LCD_BGR555 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+/* LED */
+#define CONFIG_AT91_LED
+#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
+#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
-/* #define CONFIG_ENV_OVERWRITE 1 */
+#define CONFIG_BOOTDELAY 3
/*
* BOOTP options
*/
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
#define CONFIG_CMD_PING 1
#define CONFIG_CMD_DHCP 1
#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
#define CONFIG_HAS_DATAFLASH 1
-#define CFG_SPI_WRITE_TOUT (5*CFG_HZ)
-#define CFG_MAX_DATAFLASH_BANKS 1
-#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define CONFIG_NEW_PARTITION 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
/* NOR flash */
-#define CFG_FLASH_CFI 1
-#define CFG_FLASH_CFI_DRIVER 1
+#define CONFIG_SYS_FLASH_CFI 1
+#define CONFIG_FLASH_CFI_DRIVER 1
#define PHYS_FLASH_1 0x10000000
-#define CFG_FLASH_BASE PHYS_FLASH_1
-#define CFG_MAX_FLASH_SECT 256
-#define CFG_MAX_FLASH_BANKS 1
-
-#define AT91C_FLASH_NWE_SETUP (4 << 0)
-#define AT91C_FLASH_NCS_WR_SETUP (2 << 8)
-#define AT91C_FLASH_NRD_SETUP (4 << 16)
-#define AT91C_FLASH_NCS_RD_SETUP (2 << 24)
-
-#define AT91C_FLASH_NWE_PULSE (8 << 0)
-#define AT91C_FLASH_NCS_WR_PULSE (10 << 8)
-#define AT91C_FLASH_NRD_PULSE (8 << 16)
-#define AT91C_FLASH_NCS_RD_PULSE (10 << 24)
-
-#define AT91C_FLASH_NWE_CYCLE (16 << 0)
-#define AT91C_FLASH_NRD_CYCLE (16 << 16)
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT 256
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
/* NAND flash */
-#define NAND_MAX_CHIPS 1
-#define CFG_MAX_NAND_DEVICE 1
-#define CFG_NAND_BASE 0x40000000
-
-#define AT91C_SM_NWE_SETUP (2 << 0)
-#define AT91C_SM_NCS_WR_SETUP (1 << 8)
-#define AT91C_SM_NRD_SETUP (2 << 16)
-#define AT91C_SM_NCS_RD_SETUP (1 << 24)
-
-#define AT91C_SM_NWE_PULSE (4 << 0)
-#define AT91C_SM_NCS_WR_PULSE (6 << 8)
-#define AT91C_SM_NRD_PULSE (4 << 16)
-#define AT91C_SM_NCS_RD_PULSE (6 << 24)
-
-#define AT91C_SM_NWE_CYCLE (8 << 0)
-#define AT91C_SM_NRD_CYCLE (8 << 16)
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+#endif
-#define AT91C_SM_TDF (1 << 16)
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
/* Ethernet */
#define CONFIG_MACB 1
#define CONFIG_RESET_PHY_R 1
/* USB */
+#define CONFIG_USB_ATMEL
#define CONFIG_USB_OHCI_NEW 1
-#define LITTLEENDIAN 1
#define CONFIG_DOS_PARTITION 1
-#define CFG_USB_OHCI_CPU_INIT 1
-#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91C_BASE_UHP */
-#define CFG_USB_OHCI_SLOT_NAME "at91cap9"
-#define CFG_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
-#define CFG_LOAD_ADDR 0x72000000 /* load address */
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x73e00000
-#define CFG_MEMTEST_START PHYS_SDRAM
-#define CFG_MEMTEST_END 0x73000000
+#define CONFIG_SYS_USE_DATAFLASH 1
+#undef CONFIG_SYS_USE_NORFLASH
-#define CFG_USE_DATAFLASH 1
-#undef CFG_USE_NORFLASH
-
-#ifdef CFG_USE_DATAFLASH
+#ifdef CONFIG_SYS_USE_DATAFLASH
/* bootstrap + u-boot + env + linux in dataflash */
-#define CFG_ENV_IS_IN_DATAFLASH 1
-#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CFG_ENV_OFFSET 0x4200
-#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x72000000 0x200040; bootm"
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock1 " \
+ "mtdparts=physmap-flash.0:-(nor);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#else
/* bootstrap + u-boot + env + linux in norflash */
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_MONITOR_BASE (PHYS_FLASH_1 + 0x8000)
-#define CFG_ENV_OFFSET 0x4000
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_ENV_OFFSET)
-#define CFG_ENV_SIZE 0x4000
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_SYS_MONITOR_BASE (PHYS_FLASH_1 + 0x8000)
+#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock4 " \
+ "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
+ "16k(env),224k(uboot)ro,-(linux);" \
+ "at91_nand:-(root) " \
+ "rw rootfstype=jffs2"
#endif
-#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-#define CFG_PROMPT "U-Boot> "
-#define CFG_CBSIZE 256
-#define CFG_MAXARGS 16
-#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_LONGHELP 1
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
#define CONFIG_CMDLINE_EDITING 1
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
#define CONFIG_STACKSIZE (32*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ