OMAP3: Add support for DPLL5 (usbhost)

[u-boot] / include / configs / at91rm9200ek.h

diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index b386057c0efb16a3def2b8d0dad7cc36bbb8c8de..810023a49449b2203b1c0ff1cc0119f0be7f7963 100644 (file)
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -32,6 +32,20 @@
 
 #include <asm/sizes.h>
 
+/*
+ * set some initial configurations depending on configure target
+ *
+ * at91rm9200ek_config     -> boot from 0x0 in NOR Flash at CS0
+ * at91rm9200ek_ram_config -> continue booting from 0x20100000 in RAM; lowlevel
+ *                            initialisation was done by some preloader
+ */
+#ifdef CONFIG_RAMBOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0x20100000
+#else
+#define CONFIG_SYS_TEXT_BASE 0x10000000
+#endif
+
 /*
  * AT91C_XTAL_CLOCK is the frequency of external xtal in hertz
  * AT91C_MAIN_CLOCK is the frequency of PLLA output
@@ -57,6 +71,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 
+#define CONFIG_AT91FAMILY
+
 /*
  * Memory Configuration
  */
@@ -90,7 +106,7 @@
 #define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRAM       CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1      CONFIG_SYS_SDRAM_BASE /* address of the SDRAM */
+#define CONFIG_SYS_SDRAM1      (CONFIG_SYS_SDRAM_BASE+0x80)
 #define CONFIG_SYS_SDRAM_VAL   0x00000000 /* value written to CONFIG_SYS_SDRAM */
 #define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
 #define CONFIG_SYS_SDRC_MR_VAL1        0x00000004 /* refresh */
@@ -205,10 +221,9 @@
 #define CONFIG_SYS_MALLOC_LEN          ROUND(3 * CONFIG_ENV_SIZE + SZ_128K, \
                                             SZ_4K)
 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE       128
 
 #define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_SDRAM_BASE + SZ_4K \
-                                       - CONFIG_SYS_GBL_DATA_SIZE)
+                                       - GENERATED_GBL_DATA_SIZE)
 
 #define CONFIG_STACKSIZE               SZ_32K  /* regular stack */
 #define CONFIG_STACKSIZE_IRQ           SZ_4K   /* Unsure if to big or to small*/