86xx: XPedite5170 board support

[u-boot] / include / configs / at91sam9263ek.h

diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 09b871a5e95f1a6c5f874ed31809b216f1f3193a..c212d11d0d21905d6686674afe12acdaa7e6becf 100644 (file)
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -28,18 +28,13 @@
 #define __CONFIG_H
 
 /* ARM asynchronous clock */
-#define AT91_CPU_NAME          "AT91SAM9263"
 #define AT91_MAIN_CLOCK                16367660        /* 16.367 MHz crystal */
-#define AT91_MASTER_CLOCK      100000000       /* peripheral */
-#define AT91_CPU_CLOCK         200000000       /* cpu */
-#define CONFIG_SYS_AT91_PLLB   0x133a3e8d      /* PLLB settings for USB */
-#define CONFIG_SYS_HZ          1000000         /* 1us resolution */
-
-#define AT91_SLOW_CLOCK                32768   /* slow clock */
+#define CONFIG_SYS_HZ          1000
 
 #define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
 #define CONFIG_AT91SAM9263     1       /* It's an Atmel AT91SAM9263 SoC*/
 #define CONFIG_AT91SAM9263EK   1       /* on an AT91SAM9263EK Board    */
+#define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff  */
 
 #define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs      */
@@ -70,6 +65,12 @@
 #define CONFIG_ATMEL_LCD_BGR555                1
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV           1
 
+/* LED */
+#define CONFIG_AT91_LED
+#define        CONFIG_RED_LED          AT91_PIN_PB7    /* this is the power led */
+#define        CONFIG_GREEN_LED        AT91_PIN_PB8    /* this is the user1 led */
+#define        CONFIG_YELLOW_LED       AT91_PIN_PC29   /* this is the user2 led */
+
 #define CONFIG_BOOTDELAY       3
 
 /*
@@ -85,11 +86,11 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMI
 #undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_SOURCE
 
 #define CONFIG_CMD_PING                1
 #define CONFIG_CMD_DHCP                1
@@ -102,6 +103,7 @@
 #define PHYS_SDRAM_SIZE                        0x04000000      /* 64 megs */
 
 /* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_HAS_DATAFLASH           1
 #define CONFIG_SYS_SPI_WRITE_TOUT              (5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS         1
@@ -123,9 +125,18 @@
 #endif
 
 /* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_BASE                   0x40000000
 #define CONFIG_SYS_NAND_DBW_8                  1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE               (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE               (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PD15
+#define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PA22
+#endif
 
 /* Ethernet */
 #define CONFIG_MACB                    1
@@ -135,6 +146,7 @@
 #define CONFIG_RESET_PHY_R             1
 
 /* USB */
+#define CONFIG_USB_ATMEL
 #define CONFIG_USB_OHCI_NEW            1
 #define CONFIG_DOS_PARTITION           1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT           1
@@ -187,6 +199,9 @@
 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_LONGHELP            1
 #define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define ROUND(A, B)            (((A) + (B)) & ~((B) - 1))
 /*