configs: Migrate CONFIG_SYS_TEXT_BASE

[u-boot] / include / configs / at91sam9m10g45ek.h

diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index a0c5b9afae1baff03808eb5619e60b9ea8e05157..cc0109b3844ed5d47643130f5fee3f1b40541314 100644 (file)
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -11,10 +11,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE           0x73f00000
-
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 
 /* ARM asynchronous clock */
@@ -50,15 +46,9 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_NAND
-
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
-#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
+#define CONFIG_SYS_SDRAM_BASE           0x70000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000
 
 #define CONFIG_SYS_INIT_SP_ADDR \
@@ -88,9 +78,8 @@
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END         0x23e00000
 
-#ifdef CONFIG_SYS_USE_NANDFLASH
+#ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env in nandflash */
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET              0x120000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                        0x20000
@@ -98,36 +87,15 @@
 #define CONFIG_BOOTCOMMAND                                             \
        "nand read 0x70000000 0x200000 0x300000;"                       \
        "bootm 0x70000000"
-#define CONFIG_BOOTARGS                                                        \
-       "console=ttyS0,115200 earlyprintk "                             \
-       "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
-       "256k(env),256k(env_redundant),256k(spare),"                    \
-       "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
-       "root=/dev/mtdblock7 rw rootfstype=jffs2"
-#elif CONFIG_SYS_USE_MMC
+#elif CONFIG_SD_BOOT
 /* bootstrap + u-boot + env + linux in mmc */
-#define FAT_ENV_INTERFACE      "mmc"
-/*
- * We don't specify the part number, if device 0 has partition table, it means
- * the first partition; it no partition table, then take whole device as a
- * FAT file system.
- */
-#define FAT_ENV_DEVICE_AND_PART        "0"
-#define FAT_ENV_FILE           "uboot.env"
-#define CONFIG_ENV_IS_IN_FAT
 #define CONFIG_ENV_SIZE                0x4000
 
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
-                               "mtdparts=atmel_nand:" \
-                               "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
-                               "root=/dev/mmcblk0p2 rw rootwait"
 #define CONFIG_BOOTCOMMAND     "fatload mmc 0:1 0x71000000 dtb; " \
                                "fatload mmc 0:1 0x72000000 zImage; " \
                                "bootz 0x72000000 - 0x71000000"
 #endif
 
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
@@ -145,18 +113,17 @@
 
 #define CONFIG_SYS_MONITOR_LEN         0x80000
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 
 #define CONFIG_SPL_BSS_START_ADDR      0x70000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00080000
 #define CONFIG_SYS_SPL_MALLOC_START    0x70080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00080000
 
-#define CONFIG_SPL_LDSCRIPT            arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
-#elif CONFIG_SYS_USE_NANDFLASH
+#elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC