Add support for KARO TX25 board

[u-boot] / include / configs / at91sam9rlek.h

diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h
index 916730454f1f2fb7656945952f5c8460514a24b3..e8fcd66c940673bed9cd06e035520f93034da67e 100644 (file)
--- a/include/configs/at91sam9rlek.h
+++ b/include/configs/at91sam9rlek.h
@@ -27,8 +27,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_AT91_LEGACY
+
 /* ARM asynchronous clock */
-#define AT91_MAIN_CLOCK                12000000        /* 12 MHz crystal */
+#define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
 #define CONFIG_SYS_HZ          1000
 
 #define CONFIG_ARM926EJS       1       /* This is an ARM926EJS Core    */
@@ -47,6 +49,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_AT91_GPIO       1
 #define CONFIG_ATMEL_USART     1
 #undef CONFIG_USART0
 #undef CONFIG_USART1
@@ -119,7 +122,6 @@
 #define CONFIG_SYS_NAND_ENABLE_PIN             AT91_PIN_PB6
 #define CONFIG_SYS_NAND_READY_PIN              AT91_PIN_PD17
 
-#define CONFIG_SYS_64BIT_VSPRINTF              /* needed for nand_util.c */
 #endif
 
 /* Ethernet - not present */
@@ -142,7 +144,7 @@
 #define CONFIG_BOOTCOMMAND     "cp.b 0xC0042000 0x22000000 0x210000; bootm"
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
                                "root=/dev/mtdblock0 " \
-                               "mtdparts=at91_nand:-(root) "\
+                               "mtdparts=atmel_nand:-(root) "\
                                "rw rootfstype=jffs2"
 
 #else /* CONFIG_SYS_USE_NANDFLASH */
@@ -155,7 +157,7 @@
 #define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
 #define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
                                "root=/dev/mtdblock5 " \
-                               "mtdparts=at91_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
+                               "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \
                                "rw rootfstype=jffs2"
 
 #endif