configs: Migrate CONFIG_SPL_FRAMEWORK

[u-boot] / include / configs / at91sam9x5ek.h

diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index eeb29763c91c94e8f69abd44280877679a1f9563..3aeb1a59445b4054d0986a72147c2996effb2424 100644 (file)
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -9,16 +9,10 @@
 #ifndef __CONFIG_H__
 #define __CONFIG_H__
 
-#include <asm/hardware.h>
-
-#define CONFIG_SYS_TEXT_BASE           0x26f00000
-
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
 
-#define CONFIG_AT91SAM9X5EK
-
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -27,16 +21,6 @@
 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
 
-/* LCD */
-#define LCD_BPP                        LCD_COLOR16
-#define LCD_OUTPUT_BPP         24
-#define CONFIG_LCD_LOGO
-#define CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#define CONFIG_ATMEL_HLCD
-#define CONFIG_ATMEL_LCD_RGB565
-
-
 /*
  * BOOTP options
  */
@@ -104,7 +88,7 @@
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END         0x26e00000
 
-#ifdef CONFIG_SYS_USE_NANDFLASH
+#ifdef CONFIG_NAND_BOOT
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_OFFSET              0x120000
 #define CONFIG_ENV_OFFSET_REDUND       0x100000
@@ -112,7 +96,7 @@
 #define CONFIG_BOOTCOMMAND     "nand read " \
                                "0x22000000 0x200000 0x300000; " \
                                "bootm 0x22000000"
-#elif defined(CONFIG_SYS_USE_SPIFLASH)
+#elif defined(CONFIG_SPI_BOOT)
 /* bootstrap + u-boot + env + linux in spi flash */
 #define CONFIG_ENV_OFFSET      0x5000
 #define CONFIG_ENV_SIZE                0x3000
@@ -130,13 +114,11 @@
 #define CONFIG_BOOTCOMMAND     "sf probe 0; " \
                                "sf read 0x22000000 0x84000 0x294000; " \
                                "bootm 0x22000000"
-#else /* CONFIG_SYS_USE_MMC */
+#else /* CONFIG_SD_BOOT */
 /* bootstrap + u-boot + env + linux in mmc */
 #define CONFIG_ENV_SIZE                0x4000
 #endif
 
-#define CONFIG_SYS_CBSIZE      256
-#define CONFIG_SYS_MAXARGS     16
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE
@@ -147,7 +129,6 @@
 #define CONFIG_SYS_MALLOC_LEN          (512 * 1024 + 0x1000)
 
 /* SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x300000
 #define CONFIG_SPL_MAX_SIZE            0x6000
 #define CONFIG_SPL_STACK               0x308000
@@ -164,13 +145,18 @@
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#ifdef CONFIG_SYS_USE_MMC
+#ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME                "u-boot.img"
 
-#elif CONFIG_SYS_USE_NANDFLASH
+#elif CONFIG_SPI_BOOT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
+
+#elif CONFIG_NAND_BOOT
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
+#endif
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_SIZE      0x800
@@ -180,10 +166,4 @@
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 
-#elif CONFIG_SYS_USE_SPIFLASH
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS     0x8400
-
-#endif
-
 #endif