Merge branch 'master' of git://git.denx.de/u-boot-marvell

[u-boot] / include / configs / bf537-stamp.h

diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 74b9ecd0b0a845ae5366c59e58f6ca48918a5b28..22d31508eb98a380b738fdf8ad47a31ff2b8ddb9 100644 (file)
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -11,7 +11,6 @@
 /*
  * Processor Settings
  */
-#define CONFIG_BFIN_CPU             bf537-0.2
 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
 
 
@@ -89,10 +88,7 @@
 #define CONFIG_ENV_SPI_MAX_HZ  30000000
 #define CONFIG_SF_DEFAULT_SPEED        30000000
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_ALL
 
 
 /*
@@ -113,7 +109,7 @@
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
 #define ENV_IS_EMBEDDED
 #else
-#define ENV_IS_EMBEDDED_CUSTOM
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #endif
 #ifdef ENV_IS_EMBEDDED
 /* WARNING - the following is hand-optimized to fit within
@@ -122,11 +118,11 @@
  * it linked after the configuration sector.
  */
 # define LDS_BOARD_TEXT \
-       cpu/blackfin/traps.o            (.text .text.*); \
-       cpu/blackfin/interrupt.o        (.text .text.*); \
-       cpu/blackfin/serial.o           (.text .text.*); \
+       arch/blackfin/cpu/traps.o               (.text .text.*); \
+       arch/blackfin/cpu/interrupt.o   (.text .text.*); \
+       arch/blackfin/cpu/serial.o              (.text .text.*); \
        common/dlmalloc.o               (.text .text.*); \
-       lib_generic/crc32.o             (.text .text.*); \
+       lib/crc32.o             (.text .text.*); \
        . = DEFINED(env_offset) ? env_offset : .; \
        common/env_embedded.o           (.text .text.*);
 #endif
@@ -137,15 +133,13 @@
  */
 #define CONFIG_BFIN_TWI_I2C    1
 #define CONFIG_HARD_I2C                1
-#define CONFIG_SYS_I2C_SPEED   50000
-#define CONFIG_SYS_I2C_SLAVE   0
 
 
 /*
  * SPI_MMC Settings
  */
 #define CONFIG_MMC
-#define CONFIG_BFIN_SPI_MMC
+#define CONFIG_SPI_MMC
 
 
 /*
@@ -157,7 +151,6 @@
 
 #define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
 #define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
-#define BFIN_NAND_READY     PF3
 #define BFIN_NAND_WRITE(addr, cmd) \
        do { \
                bfin_write8(addr, cmd); \
@@ -166,13 +159,7 @@
 
 #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
 #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
-#define NAND_PLAT_DEV_READY(chip)      (bfin_read_PORTFIO() & BFIN_NAND_READY)
-#define NAND_PLAT_INIT() \
-       do { \
-               bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \
-               bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \
-               bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \
-       } while (0)
+#define NAND_PLAT_GPIO_DEV_READY       GPIO_PF3
 
 
 /*
@@ -268,14 +255,22 @@
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE    0
 
-/* #define CONFIG_BF537_STAMP_LEDCMD   1 */
-
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
 #define FLASH_START_POST_BLOCK 11      /* Should > = 11 */
 #define FLASH_END_POST_BLOCK   71      /* Should < = 71 */
 #endif
+#define CONFIG_SYS_POST_WORD_ADDR      0xFF903FFC
+
+/* These are for board tests */
+#if 0
+#define CONFIG_BOOTCOMMAND       "bootldr 0x203f0100"
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT \
+       "autoboot in %d seconds: press space to stop\n", bootdelay
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#endif
 
 
 /*