imx_lpi2c: Update lpi2c driver to support imx8

[u-boot] / include / configs / brppt1.h

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 3dbbf67b5c6691d785735d1d58a53147a3afb433..eb45331033139d7c806a07d87992b9a63eacab83 100644 (file)
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * brtpp1.h
  *
@@ -5,8 +6,6 @@
  *
  * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
- *
- * SPDX-License-Identifier:        GPL-2.0+
  */
 
 #ifndef __CONFIG_BRPPT1_H__
@@ -20,11 +19,6 @@
 #define CONFIG_LCD_DT_SIMPLEFB
 #define LCD_BPP                                LCD_COLOR32
 
-/* Bootcount using the RTC block */
-#define CONFIG_SYS_BOOTCOUNT_ADDR      0x44E3E000
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_BOOTCOUNT_AM33XX
-
 /* memory */
 #define CONFIG_SYS_MALLOC_LEN          (5 * 1024 * 1024)
 
@@ -67,12 +61,10 @@
 /* NAND */
 #ifdef CONFIG_NAND
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS                0x140000
-#define CONFIG_CMD_SPL_WRITE_SIZE              0x2000
 #endif /* CONFIG_NAND */
 #endif /* CONFIG_SPL_OS_BOOT */
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH     /* OMAP4 and later ELM support */
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
@@ -85,8 +77,8 @@
 
 #ifdef CONFIG_NAND
 #define NANDARGS \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "nandargs=setenv bootargs console=${console} " \
                "${optargs} " \
                "${optargs_rot} " \
@@ -185,9 +177,7 @@ MMCARGS
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x8000000
-#define CONFIG_NAND_OMAP_GPMC
 /* don't change OMAP_ELM, ECCSCHEME. ROM code only supports this */
-#define CONFIG_NAND_OMAP_ELM
 #define CONFIG_NAND_OMAP_ECCSCHEME     OMAP_ECC_BCH8_CODE_HW
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128*1024)
@@ -210,22 +200,10 @@ MMCARGS
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
 
-#define MTDIDS_DEFAULT                 "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT               "mtdparts=omap2-nand.0:" \
-                                       "128k(MLO)," \
-                                       "128k(MLO.backup)," \
-                                       "128k(dtb)," \
-                                       "128k(u-boot-env)," \
-                                       "512k(u-boot)," \
-                                       "4m(kernel),"\
-                                       "128m(rootfs),"\
-                                       "-(user)"
 #define CONFIG_NAND_OMAP_GPMC_WSCFG    1
 #endif /* CONFIG_NAND */
 
 /* USB configuration */
-#define CONFIG_USB_MUSB_DSPS
-#define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_AM335X_USB0
 #define CONFIG_AM335X_USB0_MODE        MUSB_HOST
@@ -234,11 +212,8 @@ MMCARGS
 
 #if defined(CONFIG_SPI_BOOT)
 /* McSPI IP block */
-#define CONFIG_SPI
-#define CONFIG_OMAP3_SPI
 #define CONFIG_SF_DEFAULT_SPEED                24000000
 
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
@@ -260,13 +235,5 @@ MMCARGS
 #else
 #error "no storage for Environment defined!"
 #endif
-/*
- * Common filesystems support.  When we have removable storage we
- * enabled a number of useful commands and support.
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE)
-#define CONFIG_FS_EXT4
-#define CONFIG_EXT4_WRITE
-#endif /* CONFIG_MMC, ... */
 
 #endif /* ! __CONFIG_BRPPT1_H__ */