ARM: rmobile: Migrate boards to RCar IIC drivers

[u-boot] / include / configs / cl-som-am57x.h

diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 33626f72eb7485a5728f381ce3464524776cd60e..a3b40ab1966f78a3254f6e8a5f91a5d12c6afa9f 100644 (file)
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -29,8 +29,6 @@
 #define CONFIG_SYS_SPD_BUS_NUM 3
 
 /* SPI Flash support */
-#undef  CONFIG_OMAP3_SPI
-
 #define CONFIG_TI_SPI_MMAP
 #define CONFIG_SF_DEFAULT_SPEED                48000000
 #define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_3
@@ -50,7 +48,6 @@
 #define CONFIG_ENV_SIZE                        (16 << 10) /* 16 KiB env size */
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 #define CONFIG_ENV_SPI_MAX_HZ          48000000
@@ -65,7 +62,6 @@
 
 #ifndef CONFIG_SPL_BUILD
 /* SATA */
-#define CONFIG_CMD_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
@@ -75,8 +71,6 @@
                                                CONFIG_SYS_SCSI_MAX_LUN)
 /* PCA9555 GPIO expander support */
 #define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
 
@@ -84,17 +78,11 @@
 
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
 
 #define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB3PHY1_HOST
 
 /* USB Networking options */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RNDIS
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
 
 /* CPSW Ethernet */
 #define CONFIG_DRIVER_TI_CPSW
@@ -102,9 +90,7 @@
 #define CONFIG_BOOTP_DEFAULT
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
-#define CONFIG_PHY_GIGE
 #define CONFIG_PHY_ATHEROS
-#define CONFIG_PHYLIB
 #define CONFIG_SYS_RX_ETH_BUFFER       64
 #define PHY_ANEG_TIMEOUT               8000
 
@@ -128,8 +114,10 @@
        "bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \
        "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
        "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
+       "emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
+       "emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
        "load_mmc=mmc dev ${mmcdev} && mmc rescan && " \
-               "run mmcloadkernel run mmcloadfdt\0" \
+               "run mmcloadkernel && run mmcloadfdt\0" \
        "mmcroot=/dev/mmcblk1p2\0" \
        "mmcrootfstype=ext4 rw rootwait\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
@@ -165,7 +153,7 @@
                "source ${loadaddr}\0" \
        "sataboot=run load_sata && run sataargs && " \
                "echo Booting from SATA ... && " \
-               "run bootkernel\0" \
+               "run bootkernel\0"
 
 #undef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND \