Merge branch 'master' of git://git.denx.de/u-boot-net

[u-boot] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 568ae8e0972d1c9efc8376de10d2be6a2c15bf8b..c6e357a8ceb350412211cefcec17e60e1809f54d 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -114,9 +114,15 @@
 #define CONFIG_DOS_PARTITION
 
 /* USB */
-#define CONFIG_MUSB_UDC
 #define CONFIG_USB_OMAP3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_MUSB_UDC
 #define CONFIG_TWL4030_USB
+#define CONFIG_CMD_USB
 
 /* USB device configuration */
 #define CONFIG_USB_DEVICE
@@ -129,12 +135,12 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 #define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
 #define MTDPARTS_DEFAULT       "mtdparts=nand:512k(x-loader),"\
-                               "1920k(u-boot),128k(u-boot-env),"\
+                               "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
@@ -151,8 +157,6 @@
 #define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
 #define CONFIG_DRIVER_OMAP34XX_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
@@ -178,16 +182,9 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY               10
+#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "loadaddr=0x82000000\0" \
@@ -199,9 +196,9 @@
        "defaultdisplay=dvi\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext3 rootwait\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
-       "nandrootfstype=jffs2\0" \
+       "nandrootfstype=ubifs\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
@@ -227,7 +224,7 @@
                "bootm ${loadaddr}\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${loadaddr} 280000 400000; " \
+               "nand read ${loadaddr} 2a0000 400000; " \
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
@@ -282,7 +279,6 @@
  */
 #define CONFIG_NR_DRAM_BANKS   1       /* CS1 is never populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
@@ -327,9 +323,22 @@
 #define STATUS_LED_BOOT                        STATUS_LED_BIT
 #define GREEN_LED_GPIO                 186 /* CM-T35 Green LED is GPIO186 */
 
+#define CONFIG_SPLASHIMAGE_GUARD
+
 /* GPIO banks */
 #ifdef CONFIG_STATUS_LED
 #define CONFIG_OMAP3_GPIO_6    /* GPIO186 is in GPIO bank 6  */
 #endif
 
+/* Display Configuration */
+#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_VIDEO_OMAP3
+#define LCD_BPP                LCD_COLOR16
+
+#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_SPLASH_SCREEN_PREPARE
+
 #endif /* __CONFIG_H */