Convert CONFIG_NAND_OMAP_GPMC et al and CONFIG_NAND_MXC to Kconfig

[u-boot] / include / configs / cm_t35.h

diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 1898e3837d52a097ccb12ac11026aba45611558a..d0b990cb04c89be9943cb4048dc15df1a345fd5b 100644 (file)
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -24,8 +24,6 @@
  */
 #define CONFIG_CM_T3X  /* working with CM-T35 and CM-T3730 */
 
-#define CONFIG_SDRC    /* The chip has SDRC controller */
-
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
@@ -83,7 +81,6 @@
 #define CONFIG_USB_TTY
 
 /* commands to include */
-#define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
@@ -91,12 +88,9 @@
                                "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
-#define CONFIG_CMD_NAND                /* NAND support                 */
-
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
-#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_I2C_EEPROM_BUS      0
@@ -110,7 +104,6 @@
 /*
  * Board NAND Info.
  */
-#define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
@@ -179,13 +172,6 @@
 #define CONFIG_TIMESTAMP
 #define CONFIG_SYS_AUTOLOAD            "no"
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16      /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 
 #define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)     /* memtest */
                                                                /* works on */
@@ -218,10 +204,8 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 2 sectors */
 
-#define CONFIG_ENV_IS_IN_NAND
-#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET              0x260000
+#define CONFIG_ENV_ADDR                        0x260000
 
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_SMC911X
@@ -253,21 +237,15 @@
 #define CONFIG_BMP_16BPP
 #define CONFIG_SCF0403_LCD
 
-#define CONFIG_OMAP3_SPI
-
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_OMAP3_ID_NAND
-#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
@@ -306,14 +284,10 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
 /* EEPROM */
-#define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 #define CONFIG_SYS_EEPROM_SIZE                 256
 
-#define CONFIG_CMD_EEPROM_LAYOUT
-#define CONFIG_EEPROM_LAYOUT_HELP_STRING "legacy, v1, v2, v3"
-
 #endif /* __CONFIG_H */