ARM: OMAP3: Revamp IGEP module default configuration

[u-boot] / include / configs / corenet_ds.h

diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index d1ac756b56a879cbf1765a0f4f6904812c856d5d..4e2b3fb983d53ce35106bb9d1f993c33594f8174 100644 (file)
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -28,6 +28,11 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS    0xfffffffc
+#endif
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
 #define CONFIG_E500                    /* BOOKE e500 family */
@@ -41,6 +46,10 @@
 #define CONFIG_SYS_TEXT_BASE   0xeff80000
 #endif
 
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
+#endif
+
 #define CONFIG_SYS_FSL_CPC             /* Corenet Platform Cache */
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
@@ -59,12 +68,17 @@
 
 #define CONFIG_ENV_OVERWRITE
 
+#if defined(CONFIG_RAMBOOT_PBL)
+       #define CONFIG_SYS_NO_FLASH     /* Store ENV in memory only */
+#endif
+
 #ifdef CONFIG_SYS_NO_FLASH
 #define CONFIG_ENV_IS_NOWHERE
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #endif
 
 #define CONFIG_SYS_CLK_FREQ    get_board_sys_clk() /* sysclk for MPC85xx */
@@ -76,7 +90,7 @@
 #define CONFIG_BACKSIDE_L2_CACHE
 #define CONFIG_SYS_INIT_L2CSR0         L2CSR0_L2E
 #define CONFIG_BTB                     /* toggle branch predition */
-/*#define      CONFIG_DDR_ECC*/
+#define        CONFIG_DDR_ECC
 #ifdef CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE          0xdeadbeef
@@ -95,6 +109,18 @@
 #define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_PANIC_HANG      /* do not reset board on panic */
 
+/*
+ *  Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR                CONFIG_RAMBOOT_TEXT_BASE
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS   (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE)
+#else
+#define CONFIG_SYS_INIT_L3_ADDR_PHYS   CONFIG_SYS_INIT_L3_ADDR
+#endif
+#define CONFIG_SYS_L3_SIZE             (1024 << 10)
+#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
+
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -188,6 +214,10 @@
 
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
@@ -353,6 +383,7 @@
 #define CONFIG_SYS_PCIE4_IO_SIZE       0x00010000      /* 64k */
 
 /* Qman/Bman */
+#define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
 #define CONFIG_SYS_BMAN_NUM_PORTALS    10
 #define CONFIG_SYS_BMAN_MEM_BASE       0xf4000000
 #ifdef CONFIG_PHYS_64BIT
@@ -385,33 +416,10 @@
 #endif
 
 #ifdef CONFIG_PCI
-
-/*PCIE video card used*/
-#define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE1_IO_VIRT
-
-/* video */
-#define CONFIG_VIDEO
-
-#ifdef CONFIG_VIDEO
-#define CONFIG_BIOSEMU
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_ATI_RADEON_FB
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
-#endif
-
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
-#ifndef CONFIG_PCI_PNP
-#define PCI_ENET0_IOADDR               CONFIG_SYS_PCI1_IO_BUS
-#define PCI_ENET0_MEMADDR              CONFIG_SYS_PCI1_IO_BUS
-#define PCI_IDSEL_NUMBER               0x11    /* IDSEL = AD11 */
-#endif
-
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
 #endif /* CONFIG_PCI */
@@ -442,13 +450,11 @@
 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f
 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4
 
-#if (CONFIG_SYS_NUM_FMAN == 2)
 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c
 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d
 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e
 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f
 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0
-#endif
 
 #define CONFIG_SYS_TBIPA_VALUE 8
 #define CONFIG_MII             /* MII PHY management */
@@ -459,7 +465,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 
@@ -532,6 +537,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (16 << 20)      /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (16 << 20)      /* Increase max gunzip size */
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */