configs: Migrate CONFIG_SPL_FRAMEWORK

[u-boot] / include / configs / db-88f6720.h

diff --git a/include/configs/db-88f6720.h b/include/configs/db-88f6720.h
index f8454cffb51205852b4e1838921c7beee5b4aa96..25ce0ce4d3e03d5a6e429683ccbd7a6c4c099bbe 100644 (file)
--- a/include/configs/db-88f6720.h
+++ b/include/configs/db-88f6720.h
@@ -17,19 +17,11 @@
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define        CONFIG_SYS_TEXT_BASE    0x00800000
 #define CONFIG_SYS_TCLK                200000000       /* 200MHz */
 
 /*
  * Commands configuration
  */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_EXT4
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_FS_GENERIC
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -47,7 +39,6 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
 
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET              (1 << 20) /* 1MiB in */
 #define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
@@ -55,12 +46,8 @@
 #define CONFIG_PHY_MARVELL             /* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT       8000    /* PHY needs a longer aneg time */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  /* don't print console @ startup */
 #define CONFIG_SYS_ALT_MEMTEST
 
-/* Additional FS support/configuration */
-#define CONFIG_SUPPORT_VFAT
-
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
@@ -82,7 +69,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE           0x40004030
 #define CONFIG_SPL_MAX_SIZE            ((128 << 10) - 0x4030)
 
@@ -96,17 +82,8 @@
 #define CONFIG_SPL_STACK               (0x40000000 + ((192 - 16) << 10))
 #define CONFIG_SPL_BOOTROM_SAVE                (CONFIG_SPL_STACK + 4)
 
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_BUS             0
-#define CONFIG_SPL_SPI_CS              0
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x20000
 #define CONFIG_SYS_U_BOOT_OFFS         CONFIG_SYS_SPI_U_BOOT_OFFS