Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[u-boot] / include / configs / devkit3250.h

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index b8218b51f0b4274779594933cea11ff044ee72c3..d3b7620af11e9648e0fa68ec80740aec6ccd46b0 100644 (file)
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -21,7 +21,9 @@
 
 #define CONFIG_SYS_ICACHE_OFF
 #define CONFIG_SYS_DCACHE_OFF
+#if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
 #define CONFIG_BOARD_EARLY_INIT_F
 
 /*
@@ -109,7 +111,10 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD          200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP         50000000
 
+#define CONFIG_SYS_NAND_BLOCK_SIZE             0x20000
+#define CONFIG_SYS_NAND_PAGE_SIZE              NAND_LARGE_BLOCK_PAGE_SIZE
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
+
 #define CONFIG_CMD_NAND
 
 /*
@@ -173,6 +178,46 @@
 #define CONFIG_BOOTARGS                        "console=ttyS0,115200n8"
 #define CONFIG_LOADADDR                        0x80008000
 
+/*
+ * SPL specific defines
+ */
+/* SPL will be executed at offset 0 */
+#define CONFIG_SPL_TEXT_BASE           0x00000000
+
+/* SPL will use SRAM as stack */
+#define CONFIG_SPL_STACK               0x0000FFF8
+#define CONFIG_SPL_BOARD_INIT
+
+/* Use the framework and generic lib */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+
+/* SPL will use serial */
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+/* SPL loads an image from NAND */
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_RAW_ONLY
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_DRIVERS
+
+#define CONFIG_SPL_NAND_ECC
+#define CONFIG_SPL_NAND_SOFTECC
+
+#define CONFIG_SPL_MAX_SIZE            0x20000
+#define CONFIG_SPL_PAD_TO              CONFIG_SPL_MAX_SIZE
+
+/* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x60000
+
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
+
+/* See common/spl/spl.c  spl_set_header_raw_uboot() */
+#define CONFIG_SYS_MONITOR_LEN         CONFIG_SYS_NAND_U_BOOT_SIZE
+
 /*
  * Include SoC specific configuration
  */