#ifndef __CONFIG_DRA7XX_EVM_H
#define __CONFIG_DRA7XX_EVM_H
+#include <environment/ti/dfu.h>
+
#define CONFIG_DRA7XX
-#define CONFIG_BOARD_EARLY_INIT_F
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_IODELAY_RECALIBRATION
+#endif
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_MAX_MEM_MAPPED 0x80000000
#ifndef CONFIG_QSPI_BOOT
/* MMC ENV related defines */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#endif
-#define CONFIG_CMD_SAVEENV
#if (CONFIG_CONS_INDEX == 1)
#define CONSOLEDEV "ttyO0"
#define CONFIG_SYS_OMAP_ABE_SYSCK
+#ifndef CONFIG_SPL_BUILD
/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
+ /* Linux partitions */ \
"uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ /* Android partitions */ \
+ "partitions_android=" \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
+ "name=bootloader,size=768K,uuid=${uuid_gpt_bootloader};" \
+ "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
+ "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
+ "name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
+ "name=efs,size=16M,uuid=${uuid_gpt_efs};" \
+ "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
+ "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
+ "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
+ "name=system,size=768M,uuid=${uuid_gpt_system};" \
+ "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
+ "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
+ "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
+ "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
+
+#define DFUARGS \
+ "dfu_bufsiz=0x10000\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_EMMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_QSPI
+#else
+/* Discard fastboot in SPL build, to spare some space */
+#undef CONFIG_FASTBOOT
+#undef CONFIG_USB_FUNCTION_FASTBOOT
+#undef CONFIG_CMD_FASTBOOT
+#undef CONFIG_ANDROID_BOOT_IMAGE
+#undef CONFIG_FASTBOOT_BUF_ADDR
+#undef CONFIG_FASTBOOT_BUF_SIZE
+#undef CONFIG_FASTBOOT_FLASH
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_CMD_BOOTD
+#ifdef CONFIG_SPL_DFU_SUPPORT
+#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
+#define DFUARGS \
+ "dfu_bufsiz=0x10000\0" \
+ DFU_ALT_INFO_RAM
+#endif
+#endif
#include <configs/ti_omap5_common.h>
/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
-#define CONFIG_EFI_PARTITION
+#define CONFIG_RANDOM_UUID
#define CONFIG_HSMMC2_8BIT
/* CPSW Ethernet */
-#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
-#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
#define CONFIG_MII /* Required in net/eth.c */
#define CONFIG_PHY_GIGE /* per-board part of CPSW */
#define CONFIG_PHYLIB
+#define CONFIG_PHY_TI
/* SPI */
#undef CONFIG_OMAP3_SPI
-#define CONFIG_TI_QSPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_BAR
#define CONFIG_TI_SPI_MMAP
-#define CONFIG_SF_DEFAULT_SPEED 48000000
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
+#define CONFIG_SF_DEFAULT_SPEED 76800000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_QSPI_QUAD_SUPPORT
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
+
/*
* Default to using SPI for environment, etc.
- * 0x000000 - 0x010000 : QSPI.SPL (64KiB)
- * 0x010000 - 0x020000 : QSPI.SPL.backup1 (64KiB)
- * 0x020000 - 0x030000 : QSPI.SPL.backup2 (64KiB)
- * 0x030000 - 0x040000 : QSPI.SPL.backup3 (64KiB)
+ * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
* 0x040000 - 0x140000 : QSPI.u-boot (1MiB)
* 0x140000 - 0x1C0000 : QSPI.u-boot-spl-os (512KiB)
* 0x1C0000 - 0x1D0000 : QSPI.u-boot-env (64KiB)
#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000
#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000
#if defined(CONFIG_QSPI_BOOT)
-/* In SPL, use the environment and discard MMC support for space. */
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_SPL_MMC_SUPPORT
-#undef CONFIG_SPL_MAX_SIZE
-#define CONFIG_SPL_MAX_SIZE (64 << 10) /* 64 KiB */
-#endif
-#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
/* SPI SPL */
-#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_TI_EDMA3
#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB xHCI HOST */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_HOST
-#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_OMAP
-#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
/* SATA */
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
"128k(NAND.u-boot-env)," \
"128k(NAND.u-boot-env.backup1)," \
"8m(NAND.kernel)," \
- "-(NAND.rootfs)"
+ "-(NAND.file-system)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
/* #define CONFIG_INIT_IGNORE_ERROR */
#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_FLASH
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_CFI
#endif
#endif /* NOR support */
+/* EEPROM */
+#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
+#define CONFIG_EEPROM_BUS_ADDRESS 0
+
#endif /* __CONFIG_DRA7XX_EVM_H */
projects / u-boot / blobdiff