mx5/6: Define default SoC input clock frequencies

[u-boot] / include / configs / edminiv2.h

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 19b654444ccdd72b91a66df7ee432a56969f8eb3..adb505e1346b2b334be37bcb2d1a980be9191842 100644 (file)
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -45,6 +45,7 @@
 #define CONFIG_88F5182         1       /* SOC Name */
 #define CONFIG_MACH_EDMINIV2   1       /* Machine type */
 
+#include <asm/arch/orion5x.h>
 /*
  * CLKs configurations
  */
@@ -68,13 +69,18 @@
  * - GPIO16 is Power LED control (0 = on, 1 = off)
  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - Last GPIO is 26, further bits are supposed to be 0.
+ * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
+ * - GPIO22 is SATA disk power status ()
+ * - GPIO23 is supply status for SATA disk ()
+ * - GPIO24 is supply control for board (write 1 to power off)
+ * Last GPIO is 25, further bits are supposed to be 0.
  * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON.
+ * Default is LED ON, board ON :)
  */
 
-#define ORION5X_GPIO_OUT_ENABLE        0x03fcffff
-#define ORION5X_GPIO_OUT_VALUE 0x03fcffff
+#define ORION5X_GPIO_OUT_ENABLE                0xfef4f0ca
+#define ORION5X_GPIO_OUT_VALUE         0x00000000
+#define ORION5X_GPIO_IN_POLARITY       0x000000d0
 
 /*
  * NS16550 Configuration
@@ -133,6 +139,7 @@
 #include <config_cmd_default.h>
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
 
 /*
  * Network
@@ -145,7 +152,6 @@
 #define CONFIG_PHY_BASE_ADR    0x8
 #define CONFIG_RESET_PHY_R     /* use reset_phy() to init mv8831116 PHY */
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
 #define        CONFIG_MII              /* expose smi ove miiphy interface */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
 #define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
@@ -182,6 +188,19 @@
 /* end of IDE defines */
 #endif /* CMD_IDE */
 
+/*
+ * Common USB/EHCI configuration
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI                /* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_MARVELL
+#define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
 /*
  * I2C related stuff
  */
@@ -203,8 +222,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
+#define CONFIG_SYS_MALLOC_LEN  (1024 * 256) /* 256kB for malloc() */
 
 /*
  * Other required minimal configurations
@@ -215,13 +233,21 @@
 #define CONFIG_DISPLAY_CPUINFO         /* Display cpu info */
 #define CONFIG_NR_DRAM_BANKS           1
 
-#define CONFIG_STACKSIZE               0x00100000
 #define CONFIG_SYS_LOAD_ADDR           0x00800000
 #define CONFIG_SYS_MEMTEST_START       0x00400000
 #define CONFIG_SYS_MEMTEST_END         0x007fffff
 #define CONFIG_SYS_RESET_ADDRESS       0xffff0000
 #define CONFIG_SYS_MAXARGS             16
 
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Enable command line editing */
+#define CONFIG_CMDLINE_EDITING
+
+/* provide extensive help */
+#define CONFIG_SYS_LONGHELP
+
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0
 #define CONFIG_SYS_INIT_SP_ADDR        \