galaxy5200: Add default environment variables

[u-boot] / include / configs / galaxy5200.h

diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index e9a45699685a63e614df739ab5bafea4d27fe9f9..4be28b26a65a87643aeb31e7b149b438a9fcd5b4 100644 (file)
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -81,22 +81,28 @@
 #endif
 /* RAMBOOT will be defined automatically in memory section */
 
-#define MTDIDS_DEFAULT                 "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=physmap-flash.0:256k(ubootl)," \
+#define MTDIDS_DEFAULT         "nor0=physmap-flash.0"
+#define MTDPARTS_DEFAULT       "mtdparts=physmap-flash.0:256k(ubootl)," \
        "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY       10      /* autoboot after 10 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* allow stopping of boot process */
                                        /* even with bootdelay=0 */
-#undef CONFIG_BOOTARGS
+#define CONFIG_BOOT_RETRY_TIME 120     /* Reset if no command is entered  */
+#define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_PREBOOT "echo;" \
-       "echo Welcome to U-Boot"\
+       "echo Welcome to U-Boot;"\
        "echo"
 
+#define CONFIG_BOOTCOMMAND     "go ff300004 0; go ff300004 2 2;" \
+       "bootm ff040000 ff900000 fffc0000"
+#define CONFIG_BOOTARGS        "console=ttyPSC0,115200"
+#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"
+
 /*
  * IPB Bus clocking configuration.
  */
@@ -110,6 +116,7 @@
 #define CONFIG_SYS_I2C_MODULE 2                /* Select I2C module #1 or #2 */
 #define CONFIG_SYS_I2C_SPEED 100000    /* 100 kHz */
 #define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_INIT_MPC5XXX    /* Reset devices on i2c bus */
 
 /*
  * EEPROM CAT24WC32 configuration
@@ -209,7 +216,12 @@
 /* Chip Select configuration for NAND flash */
 #define CONFIG_SYS_CS1_START           0x20000000
 #define CONFIG_SYS_CS1_SIZE            0x90000
-#define CONFIG_SYS_CS1_CFG             0x0002d900
+#define CONFIG_SYS_CS1_CFG             0x00025b00
+
+/* Chip Select configuration for Epson S1D13513 */
+#define CONFIG_SYS_CS3_START           0x10000000
+#define CONFIG_SYS_CS3_SIZE            0x400000
+#define CONFIG_SYS_CS3_CFG             0xffff3d10
 
 /*
  * Ethernet configuration
@@ -361,6 +373,8 @@
                                 CONFIG_BOOTP_DNS2 | \
                                 CONFIG_BOOTP_SEND_HOSTNAME )
 
+#define CONFIG_VERSION_VARIABLE 1
+
 /*
  * Various low-level settings
  */
@@ -376,7 +390,7 @@
 #define CONFIG_SYS_BOOTCS_START                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE
 
-#define CONFIG_SYS_RESET_ADDRESS       0xff000000
+#define CONFIG_SYS_RESET_ADDRESS       0xff000000
 
 /*
  * USB settings