board/BuR: rename tseries board to brppt1

[u-boot] / include / configs / gr_cpci_ax2000.h

diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
index 846178793dae5b24efb6703248b8319a3927efea..8b573545cd8dced80aeb22c65960f7ac6b317f27 100644 (file)
--- a/include/configs/gr_cpci_ax2000.h
+++ b/include/configs/gr_cpci_ax2000.h
@@ -14,6 +14,8 @@
 #ifndef __CONFIG_H__
 #define __CONFIG_H__
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -42,9 +44,6 @@
 /* CPU / AMBA BUS configuration */
 #define CONFIG_SYS_CLK_FREQ    20000000        /* 20MHz */
 
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
 /*
  * Serial console configuration
  */
@@ -60,14 +59,12 @@
  * Supported commands
  */
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
@@ -312,34 +309,39 @@
 
 #define CONFIG_SYS_GRLIB_SDRAM    0
 
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
 /* See, GRLIB Docs (grip.pdf) on how to set up
  * These the memory controller registers.
  */
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
 #else
-#define CONFIG_SYS_GRLIB_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82205260
 #endif
-#define CONFIG_SYS_GRLIB_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x0809a000
 
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1   (0x10f800ff | (1<<11))
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x10f800ff | (1<<11))
 #if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
 #else
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2   0x82205260
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82205260
 #endif
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3   0x0809a000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x0809a000
 
 /* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG   0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
 
 /* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
 
 /* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-CPCI-AX2000"
+#define CONFIG_IDENT_STRING " Gaisler LEON3 GR-CPCI-AX2000"
 
 /* default kernel command line */
 #define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"