usb: Kconfig: migrate USB_DWC2 to Kconfig

[u-boot] / include / configs / hikey.h

diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index d08ab1d8eb2fb7a81bc8627ccc02db30398b7a7b..c7fb8a5f8e9e3efc6f261700ce29cf98ee9aafd1 100644 (file)
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -21,19 +21,12 @@
 
 #define CONFIG_SUPPORT_RAW_INITRD
 
-/* MMU Definitions */
-#define CONFIG_SYS_CACHELINE_SIZE      64
-
-#define CONFIG_IDENT_STRING            "hikey"
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /* Physical Memory Map */
 
 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
 #define CONFIG_SYS_TEXT_BASE           0x35000000
 
-#define CONFIG_NR_DRAM_BANKS           1
+#define CONFIG_NR_DRAM_BANKS           6
 #define PHYS_SDRAM_1                   0x00000000
 
 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
@@ -59,15 +52,12 @@
 
 /* Serial port PL010/PL011 through the device model */
 #define CONFIG_PL01X_SERIAL
-#define CONFIG_BAUDRATE                        115200
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_DWC2
 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
 
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_ETHER_ASIX
@@ -77,20 +67,11 @@
 #define CONFIG_HIKEY_GPIO
 
 /* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_DWMMC
-#define CONFIG_HIKEY_DWMMC
 #define CONFIG_BOUNCE_BUFFER
-#define CONFIG_CMD_MMC
 
 #define CONFIG_FS_EXT4
 
 /* Command line configuration */
-#define CONFIG_MENU
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_ENV
 
 #define CONFIG_MTD_PARTITIONS
 
@@ -123,15 +104,12 @@
                                "initrd_high=0xffffffffffffffff\0" \
                                BOOTENV
 
-/* Preserve enviroment on sd card */
-#define CONFIG_COMMAND_HISTORY
-
+/* Preserve environment on sd card */
 #define CONFIG_ENV_SIZE                        0x1000
 #define CONFIG_ENV_IS_IN_FAT
 #define FAT_ENV_INTERFACE               "mmc"
 #define FAT_ENV_DEVICE_AND_PART         "1:1"
 #define FAT_ENV_FILE                    "uboot.env"
-#define CONFIG_FAT_WRITE
 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 
 /* Monitor Command Prompt */
@@ -143,6 +121,4 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_SYS_NO_FLASH
-
 #endif /* __HIKEY_H */