added the config File for the MUNICes board.

[u-boot] / include / configs / inka4x0.h

diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h
index 0fac28fadd70d128cb799b9d811ad2cec26ef0d0..206007d884667a7d02156178ee2cd70590364a41 100644 (file)
--- a/include/configs/inka4x0.h
+++ b/include/configs/inka4x0.h
@@ -142,7 +142,7 @@
                "cp.l 100000 f0000b28 1\0"                              \
        "ideargs=setenv bootargs root=/dev/hda1 rw\0"                   \
        "ide_boot=ext2load ide 0:1 200000 uImage;"                      \
-               "run ideargs addip addcons enable_disp;bootm"           \
+               "run ideargs addip addcons enable_disp;bootm\0"         \
        "brightness=255\0"                                              \
        ""
 
@@ -156,24 +156,24 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE         0xFFE00000
-
-#define CFG_FLASH_SIZE         0x00200000 /* 2 MByte */
-#define CFG_MAX_FLASH_SECT     35      /* max num of sects on one chip */
-
-#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x4000) /* second sector */
-#define CFG_MAX_FLASH_BANKS    1       /* max num of flash banks
-                                          (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT   240000  /* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT   500     /* Flash Write Timeout (in ms)  */
+#define CFG_FLASH_CFI          1       /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER   1
+#define CFG_FLASH_BASE         0xffe00000
+#define CFG_FLASH_SIZE         0x00200000
+#define CFG_MAX_FLASH_BANKS    1       /* max num of memory banks */
+#define CFG_FLASH_BANKS_LIST   { CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT     128     /* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE 1   /* use buffered writes (20x faster) */
 
 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH    1
+#define CFG_ENV_ADDR           (CFG_FLASH_BASE + 0x4000)
 #define CFG_ENV_SIZE           0x2000
 #define CFG_ENV_SECT_SIZE      0x2000
 #define CONFIG_ENV_OVERWRITE   1
+#define CFG_USE_PPCENV                 /* Environment embedded in sect .ppcenv */
 
 /*
  * Memory map
@@ -182,7 +182,14 @@
 #define CFG_SDRAM_BASE         0x00000000
 #define CFG_DEFAULT_MBAR       0x80000000
 
-#define CONFIG_MPC5200_DDR
+/*
+ * SDRAM controller configuration
+ */
+#undef CONFIG_SDR_MT48LC16M16A2
+#undef CONFIG_DDR_MT46V16M16
+#undef CONFIG_DDR_MT46V32M16
+#undef CONFIG_DDR_HYB25D512160BF
+#define CONFIG_DDR_K4H511638C
 
 /* Use ON-Chip SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR      MPC5XXX_SRAM
@@ -203,7 +210,7 @@
 #   define CFG_RAMBOOT         1
 #endif
 
-#define CFG_MONITOR_LEN                (192 << 10)     /* Reserve 192 kB for Monitor   */
+#define CFG_MONITOR_LEN                (256 << 10)     /* Reserve 256 kB for Monitor   */
 #define CFG_MALLOC_LEN         (128 << 10)     /* Reserve 128 kB for malloc()  */
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */