* Switched default PCI speed for 8540 ADS back to 33MHz

[u-boot] / include / configs / innokom.h

diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index f8845192218414f0427812689d4809f98cf450c2..3cb9ebc454cf413b148a95c1b54aa9dcb0d5e34b 100644 (file)
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -30,12 +30,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*
- * If we are developing, we might want to start U-Boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#define CONFIG_INIT_CRITICAL           /* undef for developing */
-
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -170,14 +164,42 @@
 
 #define CFG_FLASH_BASE          PHYS_FLASH_1
 
-
 /*
- * JFFS2 Partitions
+ * JFFS2 partitions
+ *
  */
-#define CFG_JFFS_CUSTOM_PART   1               /* see board/innokom/flash.c */
-#define CONFIG_MTD_INNOKOM_16MB 1              /* development flash         */
-#undef  CONFIG_MTD_INNOKOM_64MB                        /* production flash          */
+/* development flash */
+#define CONFIG_MTD_INNOKOM_16MB        1
+#undef CONFIG_MTD_INNOKOM_64MB
+
+/* production flash */
+/*
+#define CONFIG_MTD_INNOKOM_64MB        1
+#undef CONFIG_MTD_INNOKOM_16MB
+*/
+
+/* No command line, one static partition, whole device */
+#undef CONFIG_JFFS2_CMDLINE
+#define CONFIG_JFFS2_DEV               "nor0"
+#define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF
+#define CONFIG_JFFS2_PART_OFFSET       0x00000000
 
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT         "nor0=innokom-0"
+*/
+
+/* development flash */
+/*
+#define MTDPARTS_DEFAULT       "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)"
+*/
+
+/* production flash */
+/*
+#define MTDPARTS_DEFAULT       "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)"
+*/
 
 /*
  * GPIO settings