arm64: ls1012ardb: Add distro boot support

[u-boot] / include / configs / ls1012ardb.h

diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index d2dc5ea90cb51b1ef99a96ef2fef5760aed93b5e..a14021f589bba53d628297a26335d0c84b0dcccf 100644 (file)
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -19,16 +19,6 @@
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_XHCI_USB
-
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#endif
 
 /*
  * I2C IO expander
@@ -47,18 +37,10 @@
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
 #endif
 
 /* SATA */
-#define CONFIG_LIBATA
-#define        CONFIG_SCSI
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_DOS_PARTITION
-#define CONFIG_BOARD_LATE_INIT
 
 #define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
 
@@ -66,19 +48,60 @@
 #define CONFIG_SYS_SCSI_MAX_LUN                        1
 #define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                                CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_EFI_PARTITION
-#define CONFIG_CMD_GPT
 
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_CMD_PCI
 
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS              \
+       "verify=no\0"                           \
+       "fdt_high=0xffffffffffffffff\0"         \
+       "initrd_high=0xffffffffffffffff\0"      \
+       "fdt_addr=0x00f00000\0"                 \
+       "kernel_addr=0x01000000\0"              \
+       "scriptaddr=0x80000000\0"               \
+       "fdtheader_addr_r=0x80100000\0"         \
+       "kernelheader_addr_r=0x80200000\0"      \
+       "kernel_addr_r=0x81000000\0"            \
+       "fdt_addr_r=0x90000000\0"               \
+       "load_addr=0xa0000000\0"                \
+       "kernel_size=0x2800000\0"               \
+       "console=ttyS0,115200\0"                \
+       BOOTENV                                 \
+       "boot_scripts=ls1012ardb_boot.scr\0"    \
+       "scan_dev_for_boot_part="               \
+            "part list ${devtype} ${devnum} devplist; "        \
+            "env exists devplist || setenv devplist 1; "       \
+            "for distro_bootpart in ${devplist}; do "          \
+                 "if fstype ${devtype} "                       \
+                     "${devnum}:${distro_bootpart} "           \
+                     "bootfstype; then "                       \
+                     "run scan_dev_for_boot; " \
+                 "fi; "                        \
+             "done\0"                          \
+       "scan_dev_for_boot="                              \
+               "echo Scanning ${devtype} "               \
+                               "${devnum}:${distro_bootpart}...; "  \
+               "for prefix in ${boot_prefixes}; do "     \
+                       "run scan_dev_for_scripts; "      \
+               "done;"                                   \
+               "\0"                                      \
+       "installer=load mmc 0:2 $load_addr "    \
+                  "/flex_installer_arm64.itb; "        \
+                  "bootm $load_addr#$board\0"  \
+       "qspi_bootcmd=echo Trying load from qspi..;"    \
+               "sf probe && sf read $load_addr "       \
+               "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+
+#include <asm/fsl_secure_boot.h>
+
 #endif /* __LS1012ARDB_H__ */