configs: remove CONFIG_NET_MULTI

[u-boot] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8dc04f2e574bd40eee24a31605a245b0373a4a16..ca913b06712f91c86b4d6b11bc9b22d5abde81cc 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -19,6 +19,11 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
 
+#define CONFIG_DEEP_SLEEP
+#if defined(CONFIG_DEEP_SLEEP)
+#define CONFIG_SILENT_CONSOLE
+#endif
+
 /*
  * Size of malloc() pool
  */
@@ -72,7 +77,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO              0x1c000
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
+               CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
@@ -118,7 +124,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE           0x67f80000
+#define CONFIG_SYS_TEXT_BASE           0x60100000
 #endif
 
 #define CONFIG_NR_DRAM_BANKS           1
@@ -245,7 +251,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -365,11 +370,16 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Serial Port
  */
+#ifdef CONFIG_LPUART
+#define CONFIG_FSL_LPUART
+#define CONFIG_LPUART_32B_REG
+#else
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
+#endif
 
 #define CONFIG_BAUDRATE                        115200
 
@@ -379,12 +389,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /*
  * I2C bus multiplexer
  */
 #define I2C_MUX_PCA_ADDR_PRI           0x77
 #define I2C_MUX_CH_DEFAULT             0x8
+#define I2C_MUX_CH_CH7301              0xC
 
 /*
  * MMC
@@ -426,6 +438,25 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
+/*
+ * Video
+ */
+#define CONFIG_FSL_DCU_FB
+
+#ifdef CONFIG_FSL_DCU_FB
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_I2C_DVI_BUS_NUM     0
+#define CONFIG_SYS_I2C_QIXIS_ADDR      0x66
+#define CONFIG_SYS_I2C_DVI_ADDR                0x75
+#endif
+
 /*
  * eTSEC
  */
@@ -479,10 +510,31 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
 
+#define CONFIG_SYS_PCI_64BIT
+
+#define CONFIG_SYS_PCIE_CFG0_PHYS_OFF  0x00000000
+#define CONFIG_SYS_PCIE_CFG0_SIZE      0x00001000      /* 4k */
+#define CONFIG_SYS_PCIE_CFG1_PHYS_OFF  0x00001000
+#define CONFIG_SYS_PCIE_CFG1_SIZE      0x00001000      /* 4k */
+
+#define CONFIG_SYS_PCIE_IO_BUS         0x00000000
+#define CONFIG_SYS_PCIE_IO_PHYS_OFF    0x00010000
+#define CONFIG_SYS_PCIE_IO_SIZE                0x00010000      /* 64k */
+
+#define CONFIG_SYS_PCIE_MEM_BUS                0x08000000
+#define CONFIG_SYS_PCIE_MEM_PHYS_OFF   0x04000000
+#define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
+
+#ifdef CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_CMD_PCI
+#endif
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
@@ -508,11 +560,19 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_SYS_QE_FW_ADDR     0x67f40000
 
+#ifdef CONFIG_LPUART
+#define CONFIG_EXTRA_ENV_SETTINGS       \
+       "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+       "fdt_high=0xcfffffff\0"         \
+       "initrd_high=0xcfffffff\0"      \
+       "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
        "fdt_high=0xcfffffff\0"         \
        "initrd_high=0xcfffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -593,6 +653,7 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
+#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif