arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support

[u-boot] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 139583fea1fd3ac0b6f7e7f49b87c1671a6addc9..df6843c64b188dce7979945c6a0f91676a6a15eb 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -40,6 +40,39 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ            get_board_ddr_clk()
 
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x400
+
+#define CONFIG_SPL_TEXT_BASE           0x10000000
+#define CONFIG_SPL_MAX_SIZE            0x1a000
+#define CONFIG_SPL_STACK               0x1001d000
+#define CONFIG_SPL_PAD_TO              0x1c000
+#define CONFIG_SYS_TEXT_BASE           0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
+#define CONFIG_SPL_BSS_START_ADDR      0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
+#define CONFIG_SYS_MONITOR_LEN         0x80000
+#endif
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE           0x67f80000
 #endif
@@ -70,6 +103,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_HAS_SERDES
 
 #define CONFIG_FSL_CAAM                        /* Enable CAAM */
+
+#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#define CONFIG_U_QE
+#endif
+
 /*
  * IFC Definitions
  */
@@ -110,6 +148,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS     45
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 #define CONFIG_SYS_MAX_FLASH_BANKS     2       /* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT      1024    /* sectors per device */
@@ -273,6 +312,26 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#endif
+#endif
+
 /*
  * eTSEC
  */
@@ -318,6 +377,14 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #endif
+
+/* PCIe */
+#define CONFIG_PCI             /* Enable PCI/PCIE */
+#define CONFIG_PCIE1           /* PCIE controler 1 */
+#define CONFIG_PCIE2           /* PCIE controler 2 */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -325,6 +392,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
+
 #define CONFIG_CMD_IMLS
 
 #define CONFIG_HWCONFIG
@@ -332,6 +400,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTDELAY               3
 
+#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
        "fdt_high=0xcfffffff\0"         \
@@ -344,7 +414,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              "=> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE              \
@@ -360,7 +429,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
 
 #define CONFIG_SYS_LOAD_ADDR           0x82000000
-#define CONFIG_SYS_HZ                  1000
 
 /*
  * Stack sizes
@@ -373,17 +441,28 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
 
 /*
  * Environment
  */
 #define CONFIG_ENV_OVERWRITE
 
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET              0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define CONFIG_ENV_SIZE                        0x2000
+#else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_SECT_SIZE           0x20000 /* 128K (one sector) */
+#endif
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
@@ -395,4 +474,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_HASH
 #define CONFIG_SHA_HW_ACCEL
 
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CMD_BLOB
+#endif
+
 #endif