x86: x86-common.h: Add generic FS commands

[u-boot] / include / configs / ls1021aqds.h

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index b44f3264e318e2154ee25f12db63118136d07721..e8b1ecaeb19c6da7b85f51423a8b5ebe824058f6 100644 (file)
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -11,7 +11,7 @@
 
 #define CONFIG_ARMV7_PSCI
 
-#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_FSL_CLK
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
@@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR                0xe8
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x400
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS             0x600
 
 #define CONFIG_SPL_TEXT_BASE           0x10000000
 #define CONFIG_SPL_MAX_SIZE            0x1a000
@@ -82,7 +82,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_MONITOR_LEN         0x80000
+#define CONFIG_SYS_MONITOR_LEN         0xc0000
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
@@ -371,11 +371,9 @@ unsigned long get_board_ddr_clk(void);
  * Serial Port
  */
 #ifdef CONFIG_LPUART
-#define CONFIG_FSL_LPUART
 #define CONFIG_LPUART_32B_REG
 #else
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -389,6 +387,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /*
@@ -412,14 +412,11 @@ unsigned long get_board_ddr_clk(void);
 /* SPI */
 #ifdef CONFIG_QSPI_BOOT
 /* QSPI */
-#define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
-#define CONFIG_SPI_FLASH_SPANSION
 
 /* DSPI */
-#define CONFIG_FSL_DSPI
 
 /* DM SPI */
 #if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
@@ -561,7 +558,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
-#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ          12500000
 
@@ -572,19 +569,19 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTDELAY               3
 
-#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
        "bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-       "fdt_high=0xcfffffff\0"         \
-       "initrd_high=0xcfffffff\0"      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS      \
        "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-       "fdt_high=0xcfffffff\0"         \
-       "initrd_high=0xcfffffff\0"      \
+       "fdt_high=0xffffffff\0"         \
+       "initrd_high=0xffffffff\0"      \
        "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
 
@@ -656,6 +653,7 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
 #define CONFIG_CMD_BOOTZ
 
 #define CONFIG_MISC_INIT_R