SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / include / configs / ls1043ardb.h

diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index deae7873588ee5d11a8819f4fdcb5df765d8bf5d..9b24056985f9c88b3b26fefeb505d80c60b84718 100644 (file)
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2015 Freescale Semiconductor
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1043ARDB_H__
@@ -9,12 +8,6 @@
 
 #include "ls1043a_common.h"
 
-#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x82000000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x60100000
-#endif
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
@@ -28,13 +21,13 @@
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
 
-#define CONFIG_FSL_DDR_BIST
 #ifndef CONFIG_SPL
-#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
-#endif
 #define CONFIG_SYS_DDR_RAW_TIMING
+#define CONFIG_FSL_DDR_INTERACTIVE     /* Interactive debugging */
+#define CONFIG_FSL_DDR_BIST
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043ardb/ls1043ardb_pbi.cfg
@@ -46,6 +39,11 @@
 
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043ardb/ls1043ardb_rcw_sd.cfg
+#define CONFIG_CMD_SPL
+#define CONFIG_SYS_SPL_ARGS_ADDR       0x90000000
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x10000
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x500
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 30
 #endif
 
 /*
@@ -129,7 +127,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -233,16 +230,13 @@
 #endif
 
 #if defined(CONFIG_NAND_BOOT)
-#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (24 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_SIZE                        0x2000
 #else
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SECT_SIZE           0x20000
 #define CONFIG_ENV_SIZE                        0x20000
@@ -253,8 +247,6 @@
 #define AQR105_IRQ_MASK                        0x40000000
 
 #ifdef CONFIG_NET
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #define CONFIG_PHY_VITESSE
 #define CONFIG_PHY_REALTEK
 #endif
@@ -285,21 +277,8 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_MAX_CONTROLLER_COUNT                3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-#endif
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_CMD_SCSI
 #ifndef CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT2
 #endif