include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET)

[u-boot] / include / configs / ls1046aqds.h

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 586e9e9b6b3e1ce744c11eae1bc0255928765aeb..e873682766460e6902b61521fa2b5032bd878f88 100644 (file)
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS1046AQDS_H__
@@ -9,14 +8,6 @@
 
 #include "ls1046a_common.h"
 
-#if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x82000000
-#elif defined(CONFIG_QSPI_BOOT)
-#define CONFIG_SYS_TEXT_BASE           0x40100000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x60100000
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
@@ -136,11 +127,6 @@ unsigned long get_board_ddr_clk(void);
 #define CFG_LPUART_EN          0x2
 #endif
 
-/* SATA */
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-
 /* EEPROM */
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -150,13 +136,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  5
 
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-
 /*
  * IFC Definitions
  */
@@ -178,12 +157,13 @@ unsigned long get_board_ddr_clk(void);
                                        CSOR_NOR_TRHZ_80)
 #define CONFIG_SYS_NOR_FTIM0           (FTIM0_NOR_TACSE(0x4) | \
                                        FTIM0_NOR_TEADC(0x5) | \
+                                       FTIM0_NOR_TAVDS(0x6) | \
                                        FTIM0_NOR_TEAHC(0x5))
 #define CONFIG_SYS_NOR_FTIM1           (FTIM1_NOR_TACO(0x35) | \
                                        FTIM1_NOR_TRAD_NOR(0x1a) | \
                                        FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2           (FTIM2_NOR_TCS(0x4) | \
-                                       FTIM2_NOR_TCH(0x4) | \
+#define CONFIG_SYS_NOR_FTIM2           (FTIM2_NOR_TCS(0x8) | \
+                                       FTIM2_NOR_TCH(0x8) | \
                                        FTIM2_NOR_TWPH(0xe) | \
                                        FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3           0
@@ -408,8 +388,6 @@ unsigned long get_board_ddr_clk(void);
  * Miscellaneous configurable options
  */
 #define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_AUTO_COMPLETE
 
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         0x9fffffff
@@ -454,23 +432,6 @@ unsigned long get_board_ddr_clk(void);
                                        "$kernel_size && bootm $kernel_load"
 #endif
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
-#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:2m(uboot)," \
-                       "14m(free)"
-#else
-#define MTDPARTS_DEFAULT "mtdparts=60000000.nor:" \
-                       "2m@0x100000(nor_bank0_uboot),"\
-                       "40m@0x1100000(nor_bank0_fit)," \
-                       "7m(nor_bank0_user)," \
-                       "2m@0x4100000(nor_bank4_uboot)," \
-                       "40m@0x5100000(nor_bank4_fit),"\
-                       "-(nor_bank4_user);" \
-                       "7e800000.flash:" \
-                       "4m(nand_uboot),36m(nand_kernel)," \
-                       "472m(nand_free);spi0.0:2m(uboot)," \
-                       "14m(free)"
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __LS1046AQDS_H__ */