configs: Migrate CONFIG_SYS_TEXT_BASE

[u-boot] / include / configs / ls1046ardb.h

diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index 8a6b4e637861f468741bbd57474a989a0ebc8267..d63badf3b1432877245f8f82f210efd9d5764a79 100644 (file)
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -9,12 +9,6 @@
 
 #include "ls1046a_common.h"
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_TEXT_BASE           0x82000000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x40100000
-#endif
-
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 
@@ -95,7 +89,6 @@
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
-#define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -167,12 +160,10 @@
 #endif
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV         0
 #define CONFIG_ENV_OFFSET              (3 * 1024 * 1024)
 #define CONFIG_ENV_SIZE                        0x2000
 #else
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000         /* 256KB */
@@ -183,8 +174,6 @@
 #ifndef SPL_NO_FMAN
 
 #ifdef CONFIG_NET
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #define CONFIG_PHY_REALTEK
 #endif
 
@@ -200,6 +189,8 @@
 
 #define FM1_10GEC1_PHY_ADDR            0x0
 
+#define FDT_SEQ_MACADDR_FROM_ENV
+
 #define CONFIG_ETHPRIME                        "FM1@DTSEC3"
 #endif
 
@@ -214,43 +205,15 @@
 #endif
 #endif
 
-/* USB */
-#ifndef SPL_NO_USB
-#define CONFIG_HAS_FSL_XHCI_USB
-#ifdef CONFIG_HAS_FSL_XHCI_USB
-#define CONFIG_USB_XHCI_HCD
-#define CONFIG_USB_XHCI_FSL
-#define CONFIG_USB_XHCI_DWC3
-#define CONFIG_USB_MAX_CONTROLLER_COUNT         3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif
-#endif
-
-/* SATA */
-#ifndef SPL_NO_SATA
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
-#define CONFIG_SCSI_AHCI_PLAT
-
-#define CONFIG_SYS_SATA                                AHCI_BASE_ADDR
-
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID            1
-#define CONFIG_SYS_SCSI_MAX_LUN                        1
-#define CONFIG_SYS_SCSI_MAX_DEVICE             (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                               CONFIG_SYS_SCSI_MAX_LUN)
-#endif
-
 #ifndef SPL_NO_MISC
-#define CONFIG_BOOTCOMMAND             "sf probe 0:0;sf read $kernel_load" \
-                                       "$kernel_start $kernel_size;" \
-                                       "bootm $kernel_load"
-
-#define MTDPARTS_DEFAULT "mtdparts=1550000.quadspi:1m(rcw)," \
-                       "15m(u-boot),48m(kernel.itb);" \
-                       "7e800000.flash:16m(nand_uboot)," \
-                       "48m(nand_kernel),448m(nand_free)"
+#undef CONFIG_BOOTCOMMAND
+#if defined(CONFIG_QSPI_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "    \
+                          "env exists secureboot && esbc_halt;;"
+#elif defined(CONFIG_SD_BOOT)
+#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "       \
+                          "env exists secureboot && esbc_halt;"
+#endif
 #endif
 
 #include <asm/fsl_secure_boot.h>