Convert CONFIG_SPL_I2C_SUPPORT to Kconfig

[u-boot] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 8b75088fadfdaa89d52e209cbc655970d7659f76..41f1eb505e42bef839147c65655c67a6ec2c84bf 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -26,12 +26,16 @@
 /* We need architecture specific misc initializations */
 #define CONFIG_ARCH_MISC_INIT
 
+#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
+
 /* Link Definitions */
+#ifndef CONFIG_QSPI_BOOT
 #ifdef CONFIG_SPL
 #define CONFIG_SYS_TEXT_BASE           0x80400000
 #else
 #define CONFIG_SYS_TEXT_BASE           0x30100000
 #endif
+#endif
 
 #ifdef CONFIG_EMU
 #define CONFIG_SYS_NO_FLASH
@@ -136,13 +140,6 @@
 #define CONFIG_SYS_FLASH1_BASE_PHYS            0xC0000000
 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY      0x8000000
 
-#ifndef CONFIG_SYS_NO_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#endif
-
 #ifndef __ASSEMBLY__
 unsigned long long get_qixis_addr(void);
 #endif
@@ -185,10 +182,10 @@ unsigned long long get_qixis_addr(void);
 #endif
 
 /* PCIe */
-#define CONFIG_PCIE1           /* PCIE controler 1 */
-#define CONFIG_PCIE2           /* PCIE controler 2 */
-#define CONFIG_PCIE3           /* PCIE controler 3 */
-#define CONFIG_PCIE4           /* PCIE controler 4 */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
+#define CONFIG_PCIE2           /* PCIE controller 2 */
+#define CONFIG_PCIE3           /* PCIE controller 3 */
+#define CONFIG_PCIE4           /* PCIE controller 4 */
 #define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
 #ifdef CONFIG_LS2080A
 #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
@@ -210,10 +207,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_PCIE_MEM_SIZE       0x40000000      /* 1G */
 
 /* Command line configuration */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MII
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
@@ -256,7 +250,6 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_BOOTCOMMAND     "fsl_mc apply dpl 0x580700000 &&" \
                                " cp.b $kernel_start $kernel_load" \
                                " $kernel_size && bootm $kernel_load"
-#define CONFIG_BOOTDELAY               10
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
@@ -272,10 +265,7 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -291,8 +281,14 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (640 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
+/* Hash command with SHA acceleration supported in hardware */
+#ifdef CONFIG_FSL_CAAM
+#define CONFIG_CMD_HASH
+#define CONFIG_SHA_HW_ACCEL
+#endif
+
 #endif /* __LS2_COMMON_H */