include: reset: Change to use CONFIG_IS_ENABLED(DM_RESET)

[u-boot] / include / configs / ls2080a_common.h

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 393112f50df47a2c3283b153bef8d9c22f521b3e..f1717ce579afc2634d9994812247a63e9fccab15 100644 (file)
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2017 NXP
  * Copyright (C) 2014 Freescale Semiconductor
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __LS2_COMMON_H
@@ -24,20 +23,12 @@
 
 /* Link Definitions */
 #ifndef CONFIG_QSPI_BOOT
-#ifdef CONFIG_SPL
-#define CONFIG_SYS_TEXT_BASE           0x80400000
-#else
-#define CONFIG_SYS_TEXT_BASE           0x30100000
-#endif
 #else
-#define CONFIG_SYS_TEXT_BASE           0x20100000
 #define CONFIG_ENV_SIZE                        0x2000          /* 8KB */
 #define CONFIG_ENV_OFFSET              0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE           0x40000
 #endif
 
-#define CONFIG_SUPPORT_RAW_INITRD
-
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 #ifndef CONFIG_SPL
@@ -85,14 +76,8 @@
 
 /* I2C */
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_MXC_I2C4                /* enable I2C bus 4 */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX       1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE     1
 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
@@ -203,10 +188,6 @@ unsigned long long get_qixis_addr(void);
        "mcinitcmd=fsl_mc start mc 0x580a00000" \
        " 0x580e00000 \0"
 
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 root=/dev/ram0 " \
-                               "earlycon=uart8250,mmio,0x21c0500 " \
-                               "ramdisk_size=0x2000000 default_hugepagesz=2m" \
-                               " hugepagesz=2m hugepages=256"
 #ifdef CONFIG_SD_BOOT
 #define CONFIG_BOOTCOMMAND     "mmc read 0x80200000 0x6800 0x800;"\
                                " fsl_mc apply dpl 0x80200000 &&" \
@@ -220,19 +201,10 @@ unsigned long long get_qixis_addr(void);
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE /* Boot args buffer */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING         1
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_MAXARGS             64      /* max command args */
 
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
-
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x00100000
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_MAX_SIZE            0x16000
 #define CONFIG_SPL_STACK               (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
@@ -244,7 +216,7 @@ unsigned long long get_qixis_addr(void);
 #endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
-#define CONFIG_SYS_MONITOR_LEN         (640 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (1024 * 1024)
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */