ls102xa: Adjust some macros for SD boot on LS1021A QDS board

[u-boot] / include / configs / ls2085aqds.h

diff --git a/include/configs/ls2085aqds.h b/include/configs/ls2085aqds.h
index 91d4c5bffb6019672e545f45159a2c85d6b107a0..406d0e6d47e5c018872bbdf38a721fbf9843427e 100644 (file)
--- a/include/configs/ls2085aqds.h
+++ b/include/configs/ls2085aqds.h
@@ -16,6 +16,7 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
+#define CONFIG_SYS_FSL_CLK
 #define CONFIG_SYS_CLK_FREQ            get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ            get_board_ddr_clk()
 #define COUNTER_FREQUENCY_REAL         (CONFIG_SYS_CLK_FREQ/4)
@@ -313,7 +314,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_PNP
-#define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
@@ -356,6 +356,23 @@ unsigned long get_board_ddr_clk(void);
 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 
+#define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
+#define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
+#define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
+#define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
+#define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
+#define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
+#define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
+#define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
+#define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
+#define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
+#define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
+#define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
+#define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
+#define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
+#define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
+#define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
+
 #define CONFIG_MII             /* MII PHY management */
 #define CONFIG_ETHPRIME                "DPNI1"
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */