/*
- * (C) Copyright 2001
+ * (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
#define CONFIG_MPC823 1 /* This is a MPC823E CPU */
#define CONFIG_LWMON 1 /* ...on a LWMON board */
+/* Default Ethernet MAC address */
+#define CONFIG_ETHADDR 00:11:B0:00:00:00
+
+/* The default Ethernet MAC address can be overwritten just once */
+#ifdef CONFIG_ETHADDR
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
#define CONFIG_LCD 1 /* use LCD controller ... */
#define CONFIG_HLD1045 1 /* ... with a HLD1045 display */
+#define CONFIG_LCD_LOGO 1 /* print our logo on the LCD */
+#define CONFIG_LCD_INFO 1 /* ... and some board info */
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
#define CONFIG_SERIAL_MULTI 1
CFG_POST_SPR | \
CFG_POST_SYSMON)
-#define CONFIG_BOOTCOMMAND "run flash_self"
+/*
+ * Keyboard commands:
+ * # = 0x28 = ENTER : enable bootmessages on LCD
+ * 2 = 0x3A+0x3C = F1 + F3 : enable update mode
+ * 3 = 0x3C+0x3F = F3 + F6 : enable test mode
+ */
+
+#define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv"
+/* "gatewayip=10.8.211.250\0" \ */
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr=40080000\0" \
"ramdisk_addr=40280000\0" \
- "magic_keys=#3\0" \
+ "netmask=255.255.192.0\0" \
+ "serverip=10.8.2.101\0" \
+ "ipaddr=10.8.57.0\0" \
+ "magic_keys=#23\0" \
"key_magic#=28\0" \
"key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \
+ "key_magic2=3A+3C\0" \
+ "key_cmd2=echo *** Entering Update Mode ***;" \
+ "if fatload ide 0:3 10000 update.scr;" \
+ "then autoscr 10000;" \
+ "else echo *** UPDATE FAILED ***;" \
+ "fi\0" \
"key_magic3=3C+3F\0" \
"key_cmd3=echo *** Entering Test Mode ***;" \
"setenv add_misc 'setenv bootargs $bootargs testmode'\0" \
#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
+#define CONFIG_CMD_DIAG
#endif
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_BMP | \
- CFG_CMD_POST_DIAG )
+
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_BOOTFILESIZE
-/*----------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x40000000
-#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(DEBUG) || defined(CONFIG_CMD_IDE)
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#else
#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
*/
#define CFG_FLASH_BUFFER_SIZE (2*32)
-#if 1
-/* Put environment in flash which is much faster to boot */
+/* Put environment in flash which is much faster to boot than using the EEPROM */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR 0x40040000 /* Address of Environment Sector */
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment */
#define CFG_ENV_SECT_SIZE 0x40000 /* we have BIG sectors only :-( */
-#else
-/* Environment in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM 1
-#define CFG_ENV_OFFSET 0
-#define CFG_ENV_SIZE 2048
-#endif
+
/*-----------------------------------------------------------------------
* I2C/EEPROM Configuration
*/
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET 0x0100
+#define CONFIG_SUPPORT_VFAT /* enable VFAT support */
+
/*-----------------------------------------------------------------------
*
*-----------------------------------------------------------------------
projects / u-boot / blobdiff