powerpc, 8xx: remove support for 8xx

[u-boot] / include / configs / manroland / mpc5200-common.h

diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h
index 3e4131eae171dad0fff741330983c9e3fd0309b8..736bebbe1cb9156cc22428504606082a07472036 100644 (file)
--- a/include/configs/manroland/mpc5200-common.h
+++ b/include/configs/manroland/mpc5200-common.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2009
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __MANROLAND_MPC52XX__COMMON_H
@@ -28,12 +12,12 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU               */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU)      */
+#define CONFIG_MPC5200         1       /* MPC5200 CPU */
 
-#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
+/* ... running at 33.000000MHz */
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000
 
-#define CONFIG_HIGH_BATS       1       /* High BATs supported                  */
+#define CONFIG_HIGH_BATS       1       /* High BATs supported          */
 
 /*
  * Serial console configuration
@@ -51,36 +35,6 @@
  */
 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE          2       /* Select I2C module #1 or #2 */
-
-#define CONFIG_SYS_I2C_SPEED           100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR             0x58
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CONFIG_SYS_I2C_RTC_ADDR                0x51
-
-/* I2C SYSMON (LM75) */
-#define CONFIG_DTT_LM81                        1       /* ON Semi's LM75       */
-#define CONFIG_DTT_SENSORS             {0}     /* Sensor addresses     */
-#define CONFIG_SYS_DTT_MAX_TEMP                70
-#define CONFIG_SYS_DTT_LOW_TEMP                -30
-#define CONFIG_SYS_DTT_HYSTERESIS              3
-
 /*
  * Flash configuration
  */
@@ -88,7 +42,7 @@
 
 #define CONFIG_SYS_FLASH_SIZE          0x00800000 /* 8 MByte */
 
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_ENV_ADDR        (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
 #define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of flash banks
                                           (= chip selects) */
 #define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout [ms]*/
@@ -159,11 +113,9 @@
 /*use  Hardware WDT */
 #define CONFIG_HW_WATCHDOG
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs             */
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs     */
 #if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value*/
+#  define CONFIG_SYS_CACHELINE_SHIFT   5 /* log base 2 of the above value */
 #endif
 
 /*
@@ -188,9 +140,6 @@
  *-----------------------------------------------------------------------
  */
 
-#undef  CONFIG_IDE_8xx_PCCARD          /* Use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 #undef CONFIG_IDE_LED                  /* LED   for ide not supported  */
 
 #define CONFIG_SYS_IDE_MAXBUS          1       /* max. 1 IDE bus       */