/*
- * (C) Copyright 2007-2008 Michal Simek
+ * (C) Copyright 2007-2010 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#include "../board/xilinx/microblaze-generic/xparameters.h"
-#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+/* MicroBlaze CPU */
#define MICROBLAZE_V5 1
+/* linear and spi flash memory */
+#ifdef XILINX_FLASH_START
+#define FLASH
+#undef SPIFLASH
+#undef RAMENV /* hold environment in flash */
+#else
+#ifdef XILINX_SPI_FLASH_BASEADDR
+#undef FLASH
+#define SPIFLASH
+#undef RAMENV /* hold environment in flash */
+#else
+#undef FLASH
+#undef SPIFLASH
+#define RAMENV /* hold environment in RAM */
+#endif
+#endif
+
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
- #define CONFIG_XILINX_UARTLITE
- #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
- #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
- #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
- #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
+# define CONFIG_XILINX_UARTLITE
+# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
- #define CONFIG_SYS_NS16550 1
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_REG_SIZE -4
- #define CONFIG_CONS_INDEX 1
- #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
- #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
- #define CONFIG_BAUDRATE 115200
-
- /* The following table includes the supported baudrates */
- #define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
- #define CONSOLE_ARG "console=console=ttyS0,115200\0"
+# define CONFIG_SYS_NS16550 1
+# define CONFIG_SYS_NS16550_SERIAL
+# if defined(__MICROBLAZEEL__)
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# else
+# define CONFIG_SYS_NS16550_REG_SIZE 4
+# endif
+# define CONFIG_CONS_INDEX 1
+# define CONFIG_SYS_NS16550_COM1 \
+ ((XILINX_UART16550_BASEADDR & ~0xF) + 0x1000)
+# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+# define CONFIG_BAUDRATE 115200
+
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+# define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
- #error Undefined uart
+# error Undefined uart
#endif
/* setting reset address */
-/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/
+/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
/* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
- #define CONFIG_XILINX_EMAC 1
- #define CONFIG_SYS_ENET
-#elif XILINX_EMACLITE_BASEADDR
- #define CONFIG_XILINX_EMACLITE 1
- #define CONFIG_SYS_ENET
-#elif XILINX_LLTEMAC_BASEADDR
- #define CONFIG_XILINX_LL_TEMAC 1
- #define CONFIG_SYS_ENET
+#undef CONFIG_SYS_ENET
+#if defined(XILINX_EMACLITE_BASEADDR) || defined(CONFIG_OF_CONTROL)
+# define CONFIG_XILINX_EMACLITE 1
+# define CONFIG_SYS_ENET
+#endif
+#if defined(XILINX_LLTEMAC_BASEADDR)
+# define CONFIG_XILINX_LL_TEMAC 1
+# define CONFIG_SYS_ENET
+#endif
+#if defined(XILINX_AXIEMAC_BASEADDR)
+# define CONFIG_XILINX_AXIEMAC 1
+# define CONFIG_SYS_ENET
#endif
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
- #define CONFIG_SYS_GPIO_0 1
- #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+# define CONFIG_XILINX_GPIO
+# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0 1
- #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
-#ifdef XILINX_TIMER_BASEADDR
- #if (XILINX_TIMER_IRQ != -1)
- #define CONFIG_SYS_TIMER_0 1
- #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
- #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
- #define FREQUENCE XILINX_CLOCK_FREQ
- #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
- #endif
-#elif XILINX_CLOCK_FREQ
- #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ)
+# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+#endif
+
+/* watchdog */
+#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
+# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
+# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
+# define CONFIG_HW_WATCHDOG
+# define CONFIG_XILINX_TB_WATCHDOG
+#endif
+
+#ifndef CONFIG_OF_CONTROL
+/* ddr sdram - main memory */
+# define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
+# define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN 0xC0000
+#ifndef CONFIG_SPL_BUILD
+# define CONFIG_SYS_MALLOC_F_LEN 1024
#else
- #error BAD CLOCK FREQ
+# define CONFIG_SYS_MALLOC_SIMPLE
+# define CONFIG_SYS_MALLOC_F_LEN 0x150
#endif
-/* FSL */
-/* #define CONFIG_SYS_FSL_2 */
-/* #define FSL_INTR_2 1 */
+
+/* Stack location before relocation */
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_TEXT_BASE
/*
- * memory layout - Example
- * TEXT_BASE = 0x1200_0000;
- * CONFIG_SYS_SRAM_BASE = 0x1000_0000;
- * CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
+ * CFI flash memory layout - Example
+ * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
+ * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
*
- * CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
- * CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
- * CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
+ * SECT_SIZE = 0x20000; 128kB is one sector
+ * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
*
- * 0x1000_0000 CONFIG_SYS_SDRAM_BASE
- * FREE
- * 0x1200_0000 TEXT_BASE
- * U-BOOT code
- * 0x1202_0000
+ * 0x2200_0000 CONFIG_SYS_FLASH_BASE
+ * FREE 256kB
+ * 0x2204_0000 CONFIG_ENV_ADDR
+ * ENV_AREA 128kB
+ * 0x2206_0000
* FREE
+ * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
*
- * STACK
- * 0x13F7_F000 CONFIG_SYS_MALLOC_BASE
- * MALLOC_AREA 256kB Alloc
- * 0x11FB_F000 CONFIG_SYS_MONITOR_BASE
- * MONITOR_CODE 256kB Env
- * 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
- * GLOBAL_DATA 4kB bd, gd
- * 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
*/
-/* ddr sdram - main memory */
-#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
-#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-/* global pointer */
-#define CONFIG_SYS_GBL_DATA_SIZE 0x1000 /* size of global data */
-/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
-
-/* monitor code */
-#define SIZE 0x40000
-#define CONFIG_SYS_MONITOR_LEN SIZE
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MALLOC_LEN SIZE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-
-/* stack */
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MONITOR_BASE
-
-/*#define RAMENV */
-#define FLASH
-
#ifdef FLASH
- #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
- #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
- #define CONFIG_SYS_FLASH_CFI 1
- #define CONFIG_FLASH_CFI_DRIVER 1
- #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
-
- #ifdef RAMENV
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
- #else /* !RAMENV */
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x20000
- #endif /* !RAMBOOT */
+# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
+# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
+# define CONFIG_SYS_FLASH_CFI 1
+# define CONFIG_FLASH_CFI_DRIVER 1
+/* ?empty sector */
+# define CONFIG_SYS_FLASH_EMPTY_INFO 1
+/* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* max number of sectors on one chip */
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
+/* use buffered writes (20x faster) */
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* FLASH && !RAMENV */
+# define CONFIG_ENV_IS_IN_FLASH 1
+/* 128K(one sector) for env */
+# define CONFIG_ENV_SECT_SIZE 0x20000
+# define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+# define CONFIG_ENV_SIZE 0x20000
+# endif /* FLASH && !RAMBOOT */
#else /* !FLASH */
- /* ENV in RAM */
- #define CONFIG_SYS_NO_FLASH 1
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
+
+#ifdef SPIFLASH
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
+# define CONFIG_XILINX_SPI 1
+# define CONFIG_SPI 1
+# define CONFIG_SPI_FLASH 1
+# define CONFIG_SPI_FLASH_STMICRO 1
+# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
+# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
+
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* SPIFLASH && !RAMENV */
+# define CONFIG_ENV_IS_IN_SPI_FLASH 1
+# define CONFIG_ENV_SPI_MODE SPI_MODE_3
+# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+/* 128K(two sectors) for env */
+# define CONFIG_ENV_SECT_SIZE 0x10000
+# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
+/* Warning: adjust the offset in respect of other flash content and size */
+# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
+# endif /* SPIFLASH && !RAMBOOT */
+#else /* !SPIFLASH */
+
+/* ENV in RAM */
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+#endif /* !SPIFLASH */
#endif /* !FLASH */
/* system ace */
#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
+# define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+# define SYSTEMACE_CONFIG_FPGA
+# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+# define CONFIG_DOS_PARTITION
+#endif
+
+#if defined(XILINX_USE_ICACHE)
+# define CONFIG_ICACHE
+#else
+# undef CONFIG_ICACHE
+#endif
+
+#if defined(XILINX_USE_DCACHE)
+# define CONFIG_DCACHE
+#else
+# undef CONFIG_DCACHE
+#endif
+
+#ifndef XILINX_DCACHE_BYTE_SIZE
+#define XILINX_DCACHE_BYTE_SIZE 32768
#endif
/*
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_GPIO
+
+#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
+# define CONFIG_CMD_CACHE
+#else
+# undef CONFIG_CMD_CACHE
+#endif
#ifndef CONFIG_SYS_ENET
- #undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NFS
#else
- #define CONFIG_CMD_PING
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_TFTPPUT
#endif
#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_FLASH
- #define CONFIG_CMD_IMLS
- #define CONFIG_CMD_JFFS2
-
- #if !defined(RAMENV)
- #define CONFIG_CMD_ENV
- #define CONFIG_CMD_SAVES
- #endif
+# define CONFIG_CMD_ECHO
+# define CONFIG_CMD_FLASH
+# define CONFIG_CMD_IMLS
+# define CONFIG_CMD_JFFS2
+# define CONFIG_CMD_UBI
+# undef CONFIG_CMD_UBIFS
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVEENV
+# define CONFIG_CMD_SAVES
+# endif
+
+#else
+#if defined(SPIFLASH)
+# define CONFIG_CMD_SF
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVEENV
+# define CONFIG_CMD_SAVES
+# endif
#else
- #undef CONFIG_CMD_IMLS
- #undef CONFIG_CMD_FLASH
- #undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_IMLS
+# undef CONFIG_CMD_FLASH
+# undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_UBI
+# undef CONFIG_CMD_UBIFS
+#endif
#endif
#if defined(CONFIG_CMD_JFFS2)
-/* JFFS2 partitions */
-#define CONFIG_JFFS2_CMDLINE /* mtdparts command line support */
-#define MTDIDS_DEFAULT "nor0=ml401-0"
+# define CONFIG_MTD_PARTITIONS
+#endif
+
+#if defined(CONFIG_CMD_UBIFS)
+# define CONFIG_CMD_UBI
+# define CONFIG_LZO
+#endif
+
+#if defined(CONFIG_CMD_UBI)
+# define CONFIG_MTD_PARTITIONS
+# define CONFIG_RBTREE
+#endif
+
+#if defined(CONFIG_MTD_PARTITIONS)
+/* MTD partitions */
+#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=flash-0"
/* default mtd partition table */
-#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\
+#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
"256k(env),3m(kernel),1m(romfs),"\
"1m(cramfs),-(jffs2)"
#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
-#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+/* size of console buffer */
+#define CONFIG_SYS_CBSIZE 512
+ /* print buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_PREBOOT "echo U-BOOT for $(hostname);setenv preboot;echo"
+#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
- "nor0=ml401-0\0"\
- "mtdparts=mtdparts=ml401-0:"\
+#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
+ "nor0=flash-0\0"\
+ "mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
- "1m(romfs),1m(cramfs),-(jffs2)\0"
+ "1m(romfs),1m(cramfs),-(jffs2)\0"\
+ "nc=setenv stdout nc;"\
+ "setenv stdin nc\0" \
+ "serial=setenv stdout serial;"\
+ "setenv stdin serial\0"
#define CONFIG_CMDLINE_EDITING
+#define CONFIG_NETCONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Enable flat device tree support */
+#define CONFIG_LMB 1
+#define CONFIG_FIT 1
+#define CONFIG_OF_LIBFDT 1
+
+#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
+# define CONFIG_MII 1
+# define CONFIG_CMD_MII 1
+# define CONFIG_PHY_GIGE 1
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
+# define CONFIG_PHYLIB 1
+# define CONFIG_PHY_ATHEROS 1
+# define CONFIG_PHY_BROADCOM 1
+# define CONFIG_PHY_DAVICOM 1
+# define CONFIG_PHY_LXT 1
+# define CONFIG_PHY_MARVELL 1
+# define CONFIG_PHY_MICREL 1
+# define CONFIG_PHY_NATSEMI 1
+# define CONFIG_PHY_REALTEK 1
+# define CONFIG_PHY_VITESSE 1
+#else
+# undef CONFIG_MII
+# undef CONFIG_CMD_MII
+# undef CONFIG_PHYLIB
+#endif
+
+/* SPL part */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SPL_LDSCRIPT "arch/microblaze/cpu/u-boot-spl.lds"
+
+#define CONFIG_SPL_RAM_DEVICE
+#ifdef CONFIG_SYS_FLASH_BASE
+# define CONFIG_SPL_NOR_SUPPORT
+# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
+#endif
+
+/* for booting directly linux */
+#define CONFIG_SPL_OS_BOOT
+
+#define CONFIG_SYS_OS_BASE (CONFIG_SYS_FLASH_BASE + \
+ 0x60000)
+#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
+ 0x40000)
+#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
+ 0x1000000)
+
+/* SP location before relocation, must use scratch RAM */
+/* BRAM start */
+#define CONFIG_SYS_INIT_RAM_ADDR 0x0
+/* BRAM size - will be generated */
+#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
+
+# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_MALLOC_F_LEN)
+
+/* Just for sure that there is a space for stack */
+#define CONFIG_SPL_STACK_SIZE 0x100
+
+#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
+ CONFIG_SYS_INIT_RAM_ADDR - \
+ CONFIG_SYS_MALLOC_F_LEN - \
+ CONFIG_SPL_STACK_SIZE)
+
#endif /* __CONFIG_H */