GRETH: removed unneccesary register write and one clean up.

[u-boot] / include / configs / muas3001.h

diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index f031a17b271667258bb6c25bcad498f2e27c6427..8b3022b2c0974e0965ada9331e0942fb927d3a16 100644 (file)
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -33,6 +33,8 @@
 #define CONFIG_MPC8260         1
 #define CONFIG_MUAS3001                1
 
+#define        CONFIG_SYS_TEXT_BASE    0xFF000000
+
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
 /* Do boardspecific init */
@@ -74,6 +76,7 @@
 
 #define CONFIG_ETHER_INDEX     1
 #define CONFIG_ETHER_ON_FCC1
+#define CONFIG_HAS_ETH0
 #define FCC_ENET
 
 /*
@@ -100,6 +103,10 @@
  * GPIO pins used for bit-banged MII communications
  */
 #define MDIO_PORT      0               /* Port A */
+#define MDIO_DECLARE   volatile ioport_t *iop = ioport_addr ( \
+                               (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
+#define MDC_DECLARE    MDIO_DECLARE
+
 
 #define CONFIG_SYS_MDIO_PIN    0x00200000      /* PA10 */
 #define CONFIG_SYS_MDC_PIN     0x00400000      /* PA9  */
@@ -220,7 +227,7 @@
 
 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #define CONFIG_SYS_RAMBOOT
 #endif
@@ -253,9 +260,8 @@
 #define CONFIG_SYS_DEFAULT_IMMR        0x0F010000
 
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_END        0x2000  /* End of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /* Hard reset configuration word */
@@ -270,9 +276,6 @@
 #define CONFIG_SYS_HRCW_SLAVE6         0
 #define CONFIG_SYS_HRCW_SLAVE7         0
 
-#define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM          0x02    /* Software reboot                  */
-
 #define CONFIG_SYS_MALLOC_LEN          (4096 << 10)    /* Reserve 4 MB for malloc()    */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 
@@ -404,8 +407,6 @@
 #define CONFIG_OF_LIBFDT       1
 #define CONFIG_OF_BOARD_SETUP  1
 
-#define OF_CPU                 "PowerPC,8270@0"
-#define OF_SOC                 "soc@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)
 #if defined(CONFIG_MUAS_DEV_BOARD)
 #define OF_STDOUT_PATH         "/soc/cpm/serial@11a90"