pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig

[u-boot] / include / configs / mvebu_armada-8k.h

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 58b88016e2c0196c65d77f49e6c7fff7e4de03a3..86e0d4382119601032272c80bf86215b1170ecb1 100644 (file)
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -24,7 +24,6 @@
 /* auto boot */
 #define CONFIG_PREBOOT
 
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
                                          115200, 230400, 460800, 921600 }
 
@@ -38,8 +37,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS       /* enable memory tag */
 
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
-#define        CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
-               +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
 
 /*
  * Size of malloc() pool
@@ -76,36 +73,30 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 
-/* Environment in SPI NOR flash */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET              0x180000 /* as Marvell U-Boot version */
 #define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
 #define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
 
-/* USB 2.0 */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_NAND_MAX_CHIPS      1
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
-/* USB 3.0 */
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
+/*
+ * Ethernet Driver configuration
+ */
+#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
+#define CONFIG_ARP_TIMEOUT     200
+#define CONFIG_NET_RETRY_COUNT 50
 
-#define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
-                                        CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
 
 /* USB ethernet */
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_RTL8152
-#define CONFIG_USB_ETHER_SMSC95XX
 
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_LIBATA
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
@@ -114,26 +105,11 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
                                         CONFIG_SYS_SCSI_MAX_LUN)
 
-/* MMC/SD IP block */
-#define CONFIG_GENERIC_MMC
-
-#define CONFIG_SUPPORT_VFAT
-
-/* DISK Partition support */
-#define CONFIG_EFI_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION           /* Experimental */
-
-#define CONFIG_CMD_PART
-#define CONFIG_PARTITION_UUIDS
-
 /*
  * PCI configuration
  */
 #ifdef CONFIG_PCIE_DW_MVEBU
 #define CONFIG_E1000
-#define CONFIG_CMD_PCI
 #endif
 
 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */