ata: Migrate CONFIG_DWC_AHSATA to Kconfig

[u-boot] / include / configs / mx6cuboxi.h

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index bc22f56d1da14a828e0fc5d6ebad53282e3c6a0e..392f9529de2c0166bf037794c99878a0880a483c 100644 (file)
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -21,18 +21,25 @@
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
+/* SATA Configuration */
+#ifdef CONFIG_CMD_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE      1
+#define CONFIG_DWC_AHSATA_PORT_ID       0
+#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
+#define CONFIG_LBA48
+#define CONFIG_LIBATA
+#endif
+
 /* Ethernet Configuration */
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE                   ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE            RGMII
 #define CONFIG_FEC_MXC_PHYADDR         0
-#define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
 /* Framebuffer */
 #define CONFIG_VIDEO_IPUV3
-#define CONFIG_IPUV3_CLK               260000000
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
@@ -47,7 +54,6 @@
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
-#define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT \
        "if hdmidet; then " \
                "usb start; "                  \
@@ -84,6 +90,7 @@
        "console=" CONSOLE_DEV ",115200\0" \
        "bootm_size=0x10000000\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+       "finduuid=part uuid mmc 0:1 uuid\0" \
        "update_sd_firmware=" \
                "if test ${ip_dyn} = yes; then " \
                        "setenv get_cmd dhcp; " \
@@ -98,6 +105,10 @@
                        "fi; "  \
                "fi\0" \
        "findfdt="\
+               "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \
+                       "setenv fdtfile imx6q-hummingboard2.dtb; fi; " \
+               "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \
+                       "setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \
                "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
                        "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
                "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
@@ -110,12 +121,9 @@
                        "echo WARNING: Could not determine dtb to use; fi; \0" \
        BOOTENV
 
-#define CONFIG_BOOTCOMMAND \
-       "run findfdt; " \
-       "run distro_bootcmd"
-
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 0) \
+       func(SATA, sata, 0) \
        func(USB, usb, 0) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
@@ -139,7 +147,6 @@
 
 /* Environment organization */
 #define CONFIG_ENV_SIZE                        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_ENV_OFFSET              (8 * 64 * 1024)
 
 #endif                         /* __MX6CUBOXI_CONFIG_H */