arm: mvebu: Make ECC support configurable on Armada XP

[u-boot] / include / configs / mx6sabresd.h

diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index a346542130d69fa33daf9b484b3221a6c08d7bd5..bfc4f6181478fd8f781ef9a00b453527385c8e3b 100644 (file)
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -9,9 +9,6 @@
 #ifndef __MX6QSABRESD_CONFIG_H
 #define __MX6QSABRESD_CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-
 #ifdef CONFIG_SPL
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_MMC_SUPPORT
@@ -22,12 +19,6 @@
 #define CONFIG_MXC_UART_BASE   UART1_BASE
 #define CONFIG_CONSOLE_DEV             "ttymxc0"
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"
-#if defined(CONFIG_MX6Q)
-#define CONFIG_DEFAULT_FDT_FILE        "imx6q-sabresd.dtb"
-#elif defined(CONFIG_MX6DL)
-#define CONFIG_DEFAULT_FDT_FILE        "imx6dl-sabresd.dtb"
-#endif
-#define PHYS_SDRAM_SIZE                (1u * 1024 * 1024 * 1024)
 
 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
 
@@ -52,6 +43,9 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED             100000
 
 /* PMIC */
@@ -60,4 +54,18 @@
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS           0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */
+#endif
+
 #endif                         /* __MX6QSABRESD_CONFIG_H */