imx6: geam6ul: Add FEC support

[u-boot] / include / configs / mx6sxsabresd.h

diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index fdf2396c148432505134641e80d8fa984606e3ee..d423880420dbae211a53750c610ca2e505ad672c 100644 (file)
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -6,15 +6,12 @@
  * SPDX-License-Identifier:    GPL-2.0+
  */
 
-
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #include "mx6_common.h"
 
 #ifdef CONFIG_SPL
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #include "imx6_spl.h"
 #endif
 
@@ -29,7 +26,6 @@
 #ifdef CONFIG_IMX_BOOTAUX
 /* Set to QSPI2 B flash at default */
 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x78000000
-#define CONFIG_CMD_SETEXPR
 
 #define UPDATE_M4_ENV \
        "m4image=m4_qspi.bin\0" \
@@ -134,7 +130,6 @@
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS           1
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE                        SZ_1G
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
@@ -149,7 +144,6 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC4_BASE_ADDR
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
@@ -164,9 +158,6 @@
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* Network */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 
@@ -179,12 +170,9 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
-
-#define CONFIG_CMD_USB
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
@@ -195,8 +183,6 @@
 
 #define CONFIG_CMD_PCI
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(2, 0)
@@ -205,11 +191,7 @@
 
 #define CONFIG_IMX_THERMAL
 
-#define CONFIG_CMD_TIME
-
-
 #ifdef CONFIG_FSL_QSPI
-#define CONFIG_CMD_SF
 #define CONFIG_SYS_FSL_QSPI_LE
 #define CONFIG_SYS_FSL_QSPI_AHB
 #ifdef CONFIG_MX6SX_SABRESD_REVA
@@ -221,14 +203,9 @@
 #endif
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_VIDEO
 #ifdef CONFIG_VIDEO
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_MXS
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_CMD_BMP